Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 300mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B
The ACEJ80X300-50B is a double acting, adjustable-stroke compact cylinder built to ISO 21287. The hard-anodized aluminium body carries a hard-chromed S45C rod with a male thread (B code), and the 1/8" port matches this bore size. As a rough planning rule, keep real work to about 1508 N at 0.5 MPa, roughly 60% of the rated push.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on long-stroke gantries and press frames where every millimetre of envelope counts. The -50 code adds an external stop screw that trims the extend stroke anywhere in a 50 mm window, giving a usable range of 250-300 mm on site. Fixed TPU bumpers absorb end-of-stroke shock at both ends, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi). Note that the adjuster is a mechanical end stop only: on air loss the piston still drifts, so it is not a load-holding brake.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B Is Used
Pallet elevator stops
The stop screw lets a integrator dial the extend stroke between 250 and 300 mm to match pallet heights on a lift-and-locate station, while the short body keeps the cylinder inside the frame.
Gate and clamp actuation
On food and packaging line guard gates, the male threaded 20 mm rod with a Y knuckle drives swing clamps, and the 1/8" port keeps plumbing simple at 30-500 mm/s.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B the Right Cylinder?
If you need the rod to stay put mid-stroke when air is lost, add an external locking unit - the -50 stop screw only shortens the extend stroke within its window. FA flange or LB foot mountings bolt to the ISO 21287 face, and I/Y rod knuckles suit the male threaded rod. If position feedback is needed later, order the -S variant so CMSE / DMSE switches can be fitted; this model without the S code has no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B FAQ
Push is 2513.3 N and pull is 2356.2 N at 0.5 MPa; at 0.7 MPa push reaches 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. It is double acting with an adjustable extend stroke (50 mm window, so 250-300 mm usable), 1/8" ports, 20 mm male-threaded rod, speed 30-500 mm/s, operating pressure 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits long-stroke machines with tight envelopes. Shock at each end of travel is taken by a fixed TPU bumper, which decelerates only and never locks a load. FA flange and LB foot mountings plus I/Y rod knuckles bolt straight on. Position sensing requires the optional -S magnet with CMSE or DMSE switches; this unit, ordered without S, carries no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X300-50B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.