Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 40mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke40 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ80X40-30B pairs an 80 mm bore with a 40 mm stroke and a male-threaded 20 mm rod (the B code). At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N on the extend stroke at 0.7 MPa, with a theoretical peak of 512.6 kgf at 1.0 MPa. The -30 code means an external stop screw trims the extend stroke anywhere in a 30 mm window, giving a usable range of 10-40 mm without changing hardware.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and fixtures too tight for a full-length body. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and fixed TPU bumpers absorb end-of-stroke shock at both ends.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 40 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B Is Used
Short-stroke press station
The 3518.6 N extend force at 0.7 MPa suits a benchtop crimping or staking press where the 10-40 mm trimmed range replaces a full-length cylinder in a tight frame.
Fixture clamping on a machining line
Clamps aluminium gearbox housings on a CNC fixture; the compact body fits inside the guard and the stop screw sets exact clamp travel per part.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B the Right Cylinder?
Note the stop screw is a mechanical end stop only - on air loss the piston still drifts, so add a separate locking solution if position must be held. FA flange or LB foot mounts bolt to the ISO 21287 face, and if you need switch feedback, order the -S variant, since this unit carries no magnet and accepts no CMSE / DMSE sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B FAQ
Push is 2513.3 N and pull 2356.2 N at 0.5 MPa; at 0.7 MPa push reaches 3518.6 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. It is double acting with an adjustable extend stroke: the -30 stop screw trims the 40 mm stroke within a 30 mm window (usable 10-40 mm). Ports are 1/8" (PT), operating pressure 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C, and the rod is a male-threaded 20 mm S45C hard-chrome shaft.
An external stop screw shortens the extend stroke on site anywhere within the ordered 30 mm window - it cannot lengthen the stroke past 40 mm. The fixed TPU bumpers at both ends only soften end-of-stroke impact; they never lock or hold a load. This unit has no magnet, so no CMSE / DMSE switch can be mounted; if you need position feedback, order the -S version with the optional magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X40-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.