Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10
The ACEJ80X45-10 is a double acting compact cylinder built to ISO 21287, with an 80 mm bore and a 45 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 35-45 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical ceiling of 512.6 kgf at 1.0 MPa. As a working rule, plan on roughly 1508 N (about 153 kg) of real work at 0.5 MPa rather than the full rating.
The hard-anodized aluminium body with an S45C hard-chrome plated 20 mm rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into short press jigs and machine frames where a full-length body cannot. A fixed TPU bumper at each end absorbs end-of-stroke impact, speed runs 30-500 mm/s, and the operating envelope is 0.15-1.0 MPa (22-145 psi), -20 to +70 C. Position sensing needs the optional -S magnet code; this unit has no magnet fitted, so CMSE or DMSE switches cannot be mounted unless -S is ordered.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10 Is Used
CNC pallet ejection
Ejecting finished housings off a machining-centre pallet: the compact body fits under the fixture plate, and about 153 kg of usable work at 0.5 MPa clears heavy aluminium castings reliably.
Pallet gate pusher
Pushing cartons past a divert gate on a warehouse conveyor line, using the 45 mm stroke trimmed to 35 mm so the pusher clears the belt edge without overtravel.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10 the Right Cylinder?
Keep in mind that the -10 stop screw is a mechanical end stop for the extend stroke only - if air is lost the piston drifts, so do not use it to hold a load mid-stroke. Mounting is via FA flange or LB foot on the ISO 21287 face, with I/Y rod knuckles available, and the rod end here is female M12x1.75 with 1/8" PT ports. If end-position detection matters, order the -S variant so CMSE / DMSE switches can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N; the theoretical maximum is 512.6 kgf at 1.0 MPa. It is double acting, runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the extend stroke is adjustable from 35 to 45 mm via the -10 stop screw.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium barrel, S45C hard-chrome 20 mm rod and fixed TPU bumpers at both ends to soften end-of-stroke impact. FA flange and LB foot mountings bolt to the standard face. Sensors are not included: the magnet is the optional -S code, so only an ACEJ80X45-10S accepts CMSE or DMSE switches - this non-S unit has no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X45-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.