Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 55mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke55 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB
This 80 mm bore ACEJ is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 55 mm stroke by up to 10 mm on site, giving a usable 45-55 mm range without changing the cylinder. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa, with a theoretical maximum of 512.6 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit. The male rod thread (B code) and the fitted -S magnet for CMSE / DMSE switches make it direct ready for monitored fixtures.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 55 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB Is Used
Pallet clamp actuator
About 1508 N of usable force at 0.5 MPa clamps cartons on a warehouse palletiser, and the CMSE switch feedback confirms clamp position each cycle.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB the Right Cylinder?
At this force class, bore 63 pushes 1558.6 N at 0.5 MPa and bore 100 pushes 3927.0 N, so 80 mm sits in the middle for heavy clamping and lifting. Remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so add a separate valve or lock for load holding. FA flange, LB foot and FTC brackets bolt to the ISO 21287 face, and this unit already carries the -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N; theoretical maximum is 512.6 kgf at 1.0 MPa. The -10 code gives a 10 mm adjustment window: an external stop screw shortens the extend stroke from 55 mm down to 45 mm. It is a mechanical end stop, not a mid-stroke lock - the piston still drifts if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at both ends.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body and a 20 mm S45C hard-chrome rod. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots. FA flange, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the ISO 21287 face; the port is 1/8" and the rod end is male thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X55-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.