Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB
The ACEJ80X60-10SB is a double acting, adjustable-stroke compact cylinder built to the ISO 21287 short-body format. The hard-anodized aluminium body carries magnet slots for switch sensing, and the S45C piston rod is hard-chrome plated with a male thread on the rod end. Air supply runs 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and rod speed spans 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore class fits press fixtures and gantries where a full-length cylinder cannot. The -10 code adds a 10 mm adjustment window: an external stop screw trims the extend stroke anywhere between 50 and 60 mm on site, so one cylinder covers several jig variants. A fixed TPU bumper at each end absorbs end-of-stroke impact.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB Is Used
Pneumatic press fixture
Delivers 2513.3 N at 0.5 MPa for staking, marking or light pressing on aluminium housings, with the 50-60 mm adjustable window matching different die heights without re-plumbing.
Pallet gate actuator
The 60 mm stroke and about 128 kg vertical-lift equivalent swing heavy conveyor gates and stops in packaging lines, while the short body fits under guard rails.
Clamp bank on a machining line
An external stop screw trims each clamp stroke to the fixture, and the fitted magnet with CMSE switches confirms clamped position back to the PLC.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB the Right Cylinder?
At 80 mm bore this sits in the heavy compact class: a 63 mm bore pushes 1558.6 N at 0.5 MPa while a 100 mm bore reaches 3927.0 N, so choose 80 mm when your load lands between roughly 900 and 1500 N of working force. The stop screw is a mechanical end stop for the extend stroke only - on air loss the piston still drifts, so add a separate valve or lock if you need position holding. FA flange and LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE or DMSE reed and solid-state switches. Rod end is male thread; ports are 1/8" PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -10 code gives a 10 mm adjustment window: an external stop screw shortens the 60 mm extend stroke down to 50 mm. It is a mechanical end stop, not a mid-stroke lock, so the rod can drift if air is lost. Speed range is 30-500 mm/s and operating pressure is 0.15-1.0 MPa (22-145 psi).
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke energy. This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clipped into the body slots for end-position sensing. FA flange and LB foot mountings plus I and Y rod knuckles bolt to the standard ISO 21287 face, and the rod ends in a male thread with 1/8" PT air ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.