Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B
A double acting ISO 21287 compact cylinder, the ACEJ80X60-20B pairs an 80 mm bore with a 60 mm stroke that an external stop screw trims on site by up to 20 mm, giving a usable extend range of 40-60 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa, with a theoretical maximum of 512.6 kgf at 1.0 MPa. Air supply is 0.15-1.0 MPa (22-145 psi) and rod speed runs 30-500 mm/s.
The hard-anodized aluminium body carries an S45C hard-chrome-plated rod with a male thread (the B code), and fixed TPU bumpers absorb end-of-stroke shock at both ends. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and fixtures where a full-length body will not fit. Note the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it never holds a load. The magnet is not fitted here; order the -S code if you need CMSE / DMSE switch sensing.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B Is Used
Injection mold clamp slide
A 60 mm stroke clamps side cores on small molds; the short ISO 21287 body fits between tie-bar-free platens where an ISO 15552 profile cylinder would overrun the frame.
Pallet gate actuator
Swings heavy pallet-line gates on the 20 mm rod, with the 1/8" port feeding the flow needed for 30-500 mm/s gate cycling at the end of a long air line.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B the Right Cylinder?
The 60 mm stroke with a 20 mm trim window suits fixed-part nesting where the exact extend position is set during commissioning. FA flange and LB foot mountings bolt to the ISO 21287 face, and I or Y rod knuckles suit the male rod thread. If position feedback is needed, specify the -S magnet variant instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B FAQ
Push is 2513.3 N and pull 2356.2 N at 0.5 MPa; at 0.7 MPa push reaches 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 60 mm extend stroke on site, so the working range is 40-60 mm. It trims the stroke only and never lengthens it past 60 mm.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome-plated male-thread rod, 1/8" PT ports and fixed TPU bumpers at both ends, running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), -20 to +70 C. This unit has no magnet, so no CMSE or DMSE switch can be read; order the optional -S magnet code to enable sensing. FA flange and LB foot mountings fit the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.