Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB
The -20 code adds an external stop screw that trims the extend stroke anywhere in a 20 mm window, so the same cylinder covers a 40-60 mm working range without re-plumbing. Air supply runs 0.15-1.0 MPa (22-145 psi) with speeds of 30-500 mm/s.
Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 80 mm bore slots into clamping fixtures and gantries that cannot spare the depth. The magnet fitted under the -S code accepts CMSE / DMSE reed or solid-state switches for end-of-stroke signalling, and the male (B) rod thread bolts straight to your tooling.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB Is Used
Short-lift press heads
A 60 mm stroke pressing or staking operation on an assembly line, where the compact body fits under a guard that excludes a full-length profile cylinder.
Position-verified ejection
Ejecting castings or cartons from a conveyor with CMSE switch confirmation of full extend, enabled by the fitted -S magnet on this model.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB the Right Cylinder?
Choose this model when the 40-60 mm adjustable extend range and about 128 kg vertical-lift capability match the job. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet plus male rod thread make switch wiring and tooling attachment straightforward. Remember the stop screw is an end stop only: on air loss the piston drifts, so add a separate valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 60 mm extend stroke on site, giving a usable range of 40-60 mm. It is an end stop, not a mid-stroke lock, so the rod still drifts if air is lost. Speed range is 30-500 mm/s and a fixed TPU bumper decelerates both ends.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body and a 20 mm hard-chromed S45C rod. Air ports are 1/8" (PT thread on this version), the rod end is male thread (B code), and FA flange or LB foot mountings bolt to the standard face. The magnet is the optional -S code, which this model carries, so CMSE / DMSE reed or solid-state switches can be clipped to the body slots for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-20SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.