Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B
A double acting ISO 21287 compact cylinder, the ACEJ80X60-30B pairs an 80 mm bore with a 60 mm stroke that an external stop screw trims on site by up to 30 mm, giving a usable extend range of 30-60 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical ceiling of 512.6 kgf at 1.0 MPa. The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body cannot.
The 20 mm S45C hard-chrome rod ends in a male thread (the B code), the 1/8" port depends only on the bore, and fixed TPU bumpers absorb end-of-stroke shock. No magnet is fitted; order the -S code if you later need CMSE / DMSE switch positions.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B Is Used
Pallet gate actuator
Swing or lift gates on a warehouse palletizing cell with the 80 mm bore, mounting via FA flange where the compact body must fit inside the guard line.
Machined-part ejector
Kick finished steel blanks off a CNC fixture using the male rod thread and Y knuckle, trimming the extend stroke down to 30 mm for shallow pockets.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B the Right Cylinder?
Remember the stop screw only shortens the extend stroke within the 30 mm window - it is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange and LB foot mountings bolt to the ISO 21287 face, and the male rod thread suits clevis-style Y knuckles; PT ports are standard with G available.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B FAQ
Push is 2513.3 N and pull 2356.2 N at 0.5 MPa; at 0.7 MPa push reaches 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 60 mm extend stroke on site, so the working range is 30-60 mm. It runs double acting on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome 20 mm rod and fixed TPU bumpers at both ends. This version has no magnet, so CMSE / DMSE switches cannot be read - the optional -S magnet code enables them. FA flange, LB foot and I/Y rod knuckles attach to the standard ISO 21287 face; the male rod thread (B) and PT ports are fitted on this model.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.