Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB
Its -30 code gives a 30 mm adjustment window, so an external stop screw trims the 60 mm extend stroke anywhere in a 30-60 mm range on site. Air supply is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in press fixtures and gantries where every millimetre of envelope counts. Because the S code is ordered, the magnet is fitted, so CMSE or DMSE reed or solid-state switches can be clipped onto the body slots for end-of-stroke signalling. The male (B) rod thread and 1/8" PT ports suit heavier tooling plates.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB Is Used
Packaging line stops and pushers
Mounted on an LB foot bracket, the cylinder kicks cartons or trays off a conveyor; the fitted -S magnet drives CMSE switches so the PLC confirms each extend and retract cycle.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB the Right Cylinder?
If the load is lighter, a 63 mm bore saves space and air. Remember the stop screw only shortens the extend stroke within the 30 mm window (30-60 mm usable) and acts as an end stop, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve for suspended loads. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push rises to 3518.6 N and pull to 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The ordered stroke is 60 mm and the -30 stop screw trims the extend stroke by up to 30 mm, giving a usable 30-60 mm range. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, ports are 1/8" PT, and the rod end is male thread (B code).
This is an ISO 21287 compact cylinder with a hard-anodized aluminium body and fixed TPU bumpers at both ends; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guards and gantries. The S code means the magnet is fitted on this model, so CMSE or DMSE reed or solid-state switches can be mounted in the body slots for position feedback. FA flange and LB foot mountings, plus I and Y rod knuckles, bolt straight to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.