Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40
A double acting ISO 21287 compact cylinder, the ACEJ80X60-40 pairs an 80 mm bore with a 60 mm stroke that an external stop screw trims by up to 40 mm, giving a usable extend range of 20-60 mm on site. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those figures rise to 3518.6 N and 3298.7 N, with a theoretical 512.6 kgf at 1.0 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit.
The hard-anodized aluminium body carries a 20 mm S45C hard-chrome rod, fixed TPU bumpers absorb end-of-stroke shock at both ends, and FA flange or LB foot mounts plus I/Y rod knuckles bolt straight to the ISO 21287 face. Note the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it never holds a load mid-stroke.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -40 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40 Is Used
Bottle line gate indexing
Running at 30-500 mm/s on a packaging conveyor, the trimmed stroke stops gate plates at the exact index position, with the fixed TPU bumper quieting each stop.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40 the Right Cylinder?
Choose it when your fixture needs a stroke trimmed anywhere from 20 to 60 mm without swapping the cylinder. Air supply is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and air filtered to 40 um. The rod end is female M12x1.75 and ports are 1/8" PT (G available). If you need position feedback, order the -S variant, since this code carries no magnet and CMSE / DMSE switches only work when the optional -S magnet is fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40 FAQ
The -40 code sets a 40 mm adjustment window: an external stop screw shortens the 60 mm extend stroke to any value from 20 to 60 mm. The screw is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C.
The hard-anodized aluminium body is an ISO 21287 compact design that saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a 20 mm hard-chrome S45C rod and fixed TPU bumpers at both ends. Position sensing requires the optional -S magnet code - this model has no magnet, so CMSE / DMSE switches cannot be mounted unless you order -S. FA flange and LB foot mounts plus I/Y rod knuckles bolt directly to the ISO 21287 face; the rod end is female M12x1.75 and the port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X60-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.