Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10
An external stop screw trims the 75 mm extend stroke by up to 10 mm on site, giving a usable range of 65-75 mm without changing the cylinder. The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and machine frames.
The S45C hard-chrome rod is 20 mm, the port is 1/8" PT, and a fixed TPU bumper at each end absorbs end-of-stroke energy. CMSE / DMSE switches can be used only when the optional -S magnet is ordered; this version has no magnet fitted.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10 Is Used
Clamping in tight machine frames
With about 50% less mounting length than an ISO 15552 profile cylinder, this 80 mm bore unit clamps weldment fixtures inside compact gantry guards where a full-length body will not fit.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10 the Right Cylinder?
Remember the stop screw is a mechanical end stop only: on air loss the piston drifts, so add a separate valve or lock if you need position holding. FA flange and LB foot mountings bolt to the standard ISO 21287 face, and the female M12x1.75 rod thread suits standard rod knuckles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa it pushes 3518.6 N and pulls 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -10 code is a 10 mm adjustment window: an external stop screw shortens the 75 mm extend stroke to any length from 65 to 75 mm. It is a mechanical end stop for the extend stroke, not a mid-stroke lock, so the piston still drifts if air is lost.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body and threaded aluminium covers, saving about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at both ends absorbs end-of-stroke energy. Position sensing via CMSE or DMSE switches requires the optional -S magnet; this model, ordered without the S code, has no magnet and cannot carry a switch. FA flange and LB foot mountings, plus I and Y rod knuckles, bolt straight to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.