Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75 is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75
The ACEJ80X75-75 is a double acting ISO 21287 compact cylinder with an adjustable extend stroke: an external stop screw trims the 75 mm stroke anywhere in a 0-75 mm window, so one unit covers several fixture positions. As a rule of thumb, plan on roughly 1508 N (about 153 kg) of real working force at 0.5 MPa rather than the full rating.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in deep-draw presses and gantry clamping rigs where every millimetre of envelope counts. A fixed TPU bumper at each end absorbs end-of-stroke shock, the hard-anodized aluminium body carries a 20 mm hard-chrome-plated S45C rod with a female M12x1.75 thread, and the 1/8" ports take air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). Note: no magnet is fitted on this version, so position switches cannot be mounted unless you order the optional -S code.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75 Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75 |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75 Is Used
Short-stamp marking press
Roughly 153 kg of usable working force at 0.5 MPa is enough for date-code stamping on aluminium extrusions, and the compact body fits where a full-length profile cylinder will not.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75 the Right Cylinder?
Choose the 80 mm when your clamp or press needs the 2500 N class inside a short body. The stop screw only shortens the extend stroke and is a mechanical end stop, not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve for suspended loads. FA flange or LB foot mountings bolt to the ISO 21287 face, and I/Y rod knuckles suit the female M12x1.75 thread. If you need end-of-stroke sensing, order the -S variant so CMSE / DMSE switches can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75 FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa those rise to 3518.6 N and 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: the external stop screw shortens the 75 mm extend stroke by up to 75 mm, giving a usable 0-75 mm range. It runs at 30-500 mm/s on 0.15-1.0 MPa (22-145 psi) air, with 1.5 MPa (215 psi) proof pressure and a 1/8" port.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at both ends absorbing end-of-stroke shock. FA flange and LB foot mountings plus I/Y rod knuckles bolt straight to the standard face, and the rod end is female M12x1.75. Position sensing requires the optional -S magnet, which enables CMSE / DMSE switches; this version has no magnet fitted, so no sensor can be mounted as-is.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X75-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.