Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B
A double acting ISO 21287 compact cylinder, the ACEJ80X80-10B pairs an 80 mm bore with an 80 mm stroke that an external stop screw trims on site: the -10 code gives a 10 mm window, so the usable extend range is 70-80 mm. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa, with a theoretical peak of 512.6 kgf at 1.0 MPa. The male rod thread (B code) and 1/8" PT ports suit heavier tooling plates.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit. The hard-anodized aluminium body carries an S45C hard-chrome rod, a fixed TPU bumper sits at both ends, and FA flange or LB foot mounts bolt to the standard ISO 21287 face. No magnet is fitted; order the -S code if you need CMSE / DMSE switch sensing.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B Is Used
Short-stamp marking press
With 3518.6 N available at 0.7 MPa, the 80 mm bore stamps batch codes on steel brackets; the compact body fits inside the press guard where a longer profile cylinder cannot.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B the Right Cylinder?
Step down to a 63 mm bore (1558.6 N) for lighter clamping, or up to 100 mm (3927.0 N) when the load demands more. If you need the rod held under load after air loss, add an external stop - the -10 adjuster is a mechanical end stop for the extend stroke, not a mid-stroke lock. FA flange or LB foot mounting covers most fixtures, and the optional -S magnet enables CMSE / DMSE position switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B FAQ
Push is 2513.3 N and pull 2356.2 N at 0.5 MPa; at 0.7 MPa push reaches 3518.6 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The 80 mm bore takes a 20 mm rod, ports are 1/8" PT, the rod end is male thread (B code), and the -10 window trims the 80 mm extend stroke to anywhere in 70-80 mm. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C on air filtered to 40 um.
An external stop screw shortens the extend stroke on site within the ordered 10 mm window - it cannot lengthen the stroke past 80 mm, and it is an end stop only, so the piston still drifts if air is lost. The body is a hard-anodized ISO 21287 compact aluminium build with a fixed TPU bumper at each end and FA/LB mounting options. Sensing requires the optional -S magnet code; this model (no S) has no magnet, so CMSE / DMSE switches cannot be fitted unless you order the -S version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.