Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB
A double acting ISO 21287 compact cylinder, the ACEJ80X80-10SB pairs an 80 mm bore with an 80 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 70-80 mm on site. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, rising to 3518.6 N at 0.7 MPa, with a theoretical peak of 512.6 kgf at 1.0 MPa. The male rod thread (B code) and 1/8" port suit heavy clamping and press circuits.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into guarded weld cells and press fixtures a full-length body cannot reach. Because this unit carries the -S magnet, CMSE or DMSE reed and solid-state switches mount directly in the body slots.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB Is Used
Gate actuation on robotic weld cells
The short body fits inside tight guarding where an ISO 15552 profile cylinder will not, while the -S magnet feeds end-of-travel signals to the cell PLC via CMSE switches.
Pallet stopper lift on conveyor ends
Halving the 256 kg vertical-lift equivalent gives about 128 kg of safe lifting, enough to raise loaded pallet stops at 30-500 mm/s with the male rod thread driving a lever.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB the Right Cylinder?
The -10 stop screw only shortens the extend stroke within 70-80 mm and is a mechanical end stop, not a mid-stroke lock, so the rod still drifts if air is lost. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-travel sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB FAQ
At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N; at 0.7 MPa push is 3518.6 N and pull 3298.7 N, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 80 mm extend stroke to any point in a 70-80 mm range. It is a mechanical end stop only, so it never holds a load if air pressure drops.
The ISO 21287 short-body build saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both ends. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots. FA flange and LB foot mountings, plus I and Y rod knuckles, bolt straight to the standard face; port thread is PT at 1/8".
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X80-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.