Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB
The AirTAC ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB
A double acting ISO 21287 compact cylinder, the ACEJ80X90-75SB pairs an 80 mm bore with a 90 mm stroke that an external stop screw trims on site: the -75 window means the extend stroke can be set anywhere from 15 to 90 mm without shims or a new cylinder. At 0.5 MPa it pushes 2513.3 N and pulls 2356.2 N, and the male rod thread (B code) plus PT ports make plumbing and tooling attachment straightforward.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses, guarding and gantries where a full-length body will not fit. Because the -S magnet is fitted, CMSE or DMSE reed or solid-state switches can be clamped into the body slots for end-of-stroke signals. A fixed TPU bumper at each end absorbs end-of-stroke impact, and the hard-anodized aluminium body with a hard-chrome plated S45C rod resists wear in daily production duty.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB Technical Specifications
| Model | Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/8" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB Is Used
Fixture clamping on machining centres
The short ISO 21287 body fits inside jig cavities too tight for a full-length profile cylinder, clamping cast aluminium housings on CNC fixtures with FA flange mounting and male-thread rod tooling.
Pallet gate and stopper actuation
On warehouse conveyor lines, the 90 mm stroke (trimmable to 15 mm) swings heavy gates and pop-up stoppers, and the fitted -S magnet feeds CMSE switch signals back to the PLC for gate-open confirmation.
Is the Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB the Right Cylinder?
If your jig needs roughly 2500 N, the 80 mm is the balanced pick. Remember the stop screw only shortens the extend stroke and is not a mid-stroke lock - on air loss the piston still drifts, so add a separate holding valve where a load must stay put. FA flange or LB foot mountings bolt to the ISO 21287 face, and the fitted -S magnet lets you add CMSE / DMSE switches whenever position feedback is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB FAQ
The -75 code sets a 75 mm adjustment window: an external stop screw shortens the 90 mm extend stroke to any length from 15 to 90 mm. It is a mechanical end stop only - it does not hold a load if air is lost. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight guarding and jig spaces. A fixed TPU bumper at both ends absorbs end-of-stroke impact. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots for position signals. Mounting options include FA flange and LB foot, with I and Y rod knuckles available; the rod end here is male thread (B code) and ports are 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACEJ80~100 Adjustable Compact Cylinder ACEJ80X90-75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.