This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X100B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X100B
The AirTAC ACP Compact Cylinder ACP63X100B is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X100B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X100B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X100B
The ACP63X100B is a discontinued DIN-standard compact cylinder that runs double acting: air both extends and retracts its 16 mm hard-chrome rod. At 0.5 MPa it pushes with 1558.6 N and pulls with 1458.1 N, rising to 2182.1 N on the extend stroke at 0.7 MPa. The B code gives a male rod thread, and the 1/8" port serves the 63 mm bore. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding where a full-length body will not fit.
The hard-anodized aluminium body carries fixed TPU bumpers at both ends, and the optional -S magnet enables CMSE or DMSE switches; without that code no magnet is fitted. Since ACP is out of production, order the current ACE63X100 and confirm the ISO 21287 mounting dimensions before the swap.
Airtac ACP Compact Cylinder ACP63X100B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X100B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X100B |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X100B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X100B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X100B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X100B Is Used
Pallet press station
Clamping palletized cartons in a packaging line: 1558.6 N push at 0.5 MPa holds a fixture shut, and the 100 mm stroke clears part loading between cycles.
Conveyor gate diverter
Swinging or pushing product gates on a bottling conveyor; the short body fits inside the conveyor frame where a longer cylinder cannot reach.
Machining fixture clamp
Securing aluminium housings on a CNC fixture, with the male rod thread (B code) taking an I/Y knuckle for side-loaded clamping arms.
Replacing the Airtac ACP Compact Cylinder ACP63X100B with the ACE63X100B
At 100 mm stroke this 63 mm bore sits mid-range: step down to the 50 mm bore for 981.7 N push at 0.5 MPa, or up to 80 mm for 2513.3 N when the load grows. If the rod must hold position with air off, add a rod lock or pilot check valve, because the bare cylinder drifts. FA/FB flange, LB foot and CA/CB clevis mounts plus I/Y knuckles bolt to the ISO 21287 face. For position sensing, order the -S code; the plain ACP63X100B has no magnet. Buy the ACE63X100 as the current direct and verify mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACE63X100B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X100B FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N push and 2041.3 N pull, with a theoretical maximum of 317.9 kgf at 1.0 MPa. It runs double acting on 0.15-1.0 MPa (22-145 psi) air at 30-500 mm/s. The model is discontinued; the current-production replacement is ACE63X100, so confirm the ISO 21287 mounting dimensions before ordering.
The 63 mm bore uses a hard-anodized aluminium body with threaded aluminium covers, an S45C hard-chrome rod, a 1/8" port and fixed TPU bumpers at both ends, saving about 50% of the mounting length of an ISO 15552 profile cylinder. Switches are possible only with the optional -S magnet code, which accepts CMSE or DMSE reed and solid-state switches; the plain B-coded unit carries no magnet.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X100B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X100B replacement — usually within 7-8 hours.