This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X110B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110B
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X110B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X110B
This is a double acting, double-rod compact cylinder: a rod exits both covers, so thrust is identical on the extend and return strokes. At the 16 mm bore that means 75.4 N in either direction at 0.5 MPa and 105.6 N at 0.7 MPa, with a peak of 15.4 kgf at 1.0 MPa. The 110 mm stroke is a made-to-order length, since the standard catalogue stops at 75 mm for this bore.
The hard-anodized aluminium body and S45C hard-chrome rod suit tight fixtures: the short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder. The through-rod resists rotation and side load and lets the rear rod carry a sensor flag, while fixed TPU bumpers pad both ends. Note this model is discontinued; the current-production direct is ACED16X110.
Airtac ACPD Double Rod Compact Cylinder ACPD16X110B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X110B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X110B |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X110B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X110B Is Used
Lab slide transfer
The symmetric through-rod pushes and pulls with equal 75.4 N force, ideal for a reciprocating sample slide between two test stations.
Flag-driven position check
With the optional -S magnet fitted, CMSE or DMSE switches on the rear rod flag confirm extend and retract on a small assembly fixture.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X110B with the ACED16X110B
Size both ways: if 75.4 N at 0.5 MPa is more than the job needs, the 12 mm bore gives 42.4 N; if it falls short, the 20 mm bore delivers 117.8 N. The B code gives a male M4x0.7 rod thread; order blank for female. The 110 mm stroke exceeds the 75 mm standard maximum, so it is built to order. Remember a plain through-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must be held. This unit is discontinued, so spec the ACED16X110 and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACED16X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X110B FAQ
Yes - the double-rod design uses the rod-side area on both strokes, so force is equal in each direction: 75.4 N at 0.5 MPa, 105.6 N at 0.7 MPa, and a maximum of 15.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, air filtered to 40 um, and the 110 mm stroke is a made-to-order length above the 75 mm standard maximum for this bore.
Order the ACED16X110, the current-production ISO 21287 successor: swap the P for an E and you keep the same 16 mm bore, 110 mm stroke and force class. The ACP is DIN-standard, so confirm the ISO 21287 mounting dimensions against your fixture before swapping. Mounting options carry over in the family: FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets, plus I/Y rod knuckles.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X110B replacement — usually within 7-8 hours.