This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X15SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X15SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 15mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X15SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X15SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB
This AirTAC ACPD16X15SB is a double acting compact cylinder with a rod leaving both covers, so the 16 mm bore delivers the same 75.4 N at 0.5 MPa (105.6 N at 0.7 MPa) on every stroke because both sides work on the rod-side area. The through-rod resists rotation and light side load, gives a symmetric mount, and the rear rod can carry a sensor flag, while fixed TPU bumpers pad both ends. Stroke is 15 mm and speed runs 30-500 mm/s.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and small guarding frames. The optional -S magnet is fitted on this code, so CMSE / DMSE switches can be added. Note: the ACPD family is discontinued; the current direct is ACED16X15 - confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X15SB |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X15SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB Is Used
Small-parts ejection in plastic molding
The symmetric through-rod pushes finished 16 mm-bore-class clips off the mold face and retracts with identical 75.4 N force, so no spring return is needed in the tight mold space.
Gated pass/fail station on an electronics line
With the fitted -S magnet driving CMSE or DMSE switches, the 15 mm stroke confirms full advance of a PCB hold-down clamp before the conveyor releases the board.
Lab sample press with dual-side tooling
A tool on each rod end lets one cylinder cap and release microplate lids alternately, using the same 105.6 N at 0.7 MPa in both directions within a compact bench frame.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB with the ACED16X15SB
At 75.4 N per direction this bore 16 unit sits between the 12 mm bore (42.4 N) and the 20 mm bore (117.8 N), both at 0.5 MPa. The male rod thread (B code) and 15 mm stroke suit short-reach tooling, and the fitted -S magnet lets you wire CMSE / DMSE switches for end-position sensing. A plain cylinder of this type drifts when air is lost, so add a rod lock or pilot check if the load must be held. Since ACPD is discontinued, order the ACED16X15 as the current-production equivalent.
Replacement checklist
- ✓ Current-production ACE → ACED16X15SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X15SB FAQ
Because a rod exits both covers, force is equal both ways: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa on every stroke, with a maximum of 15.4 kgf at 1.0 MPa. Working pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
The hard-anodized aluminium body follows the short ISO 21287-class format, saving about 50% of the mounting length of an ISO 15552 profile cylinder, with an M5x0.8 port and an 8 mm male-thread rod. This -S code carries the optional magnet, so CMSE reed or DMSE solid-state switches mount directly on the body. The ACPD line is discontinued; ACED16X15 is the current direct - confirm the ISO 21287 mounting dimensions before ordering.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X15SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X15SB replacement — usually within 7-8 hours.