This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X5S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X5S
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X5S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 5mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X5S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X5S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X5S
Double acting with a rod leaving both covers, the ACPD16X5S is a DIN-standard compact cylinder with a 16 mm bore and a very short 5 mm stroke. Because each side sees the rod-side area, output is identical in both directions: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa. The through-rod resists rotation and light side load, and the rear rod stub can carry a sensor flag. The hard-anodized aluminium body with an S45C hard-chrome rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slips into slim pick-and-place heads and micro fixtures. A fixed TPU bumper sits at both ends, and the fitted -S magnet accepts CMSE or DMSE switches. Note: this model is discontinued; the current direct is ACED16X5, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X5S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X5S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X5S |
| Bore size | Ø16 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X5S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X5S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X5S Is Used
Micro press ejection
The 75.4 N both-ways output at 0.5 MPa ejects small stamped clips from a 5 mm die pocket on a connector assembly line.
Sensor-flag indexing
The rear rod stub drives a flag past a CMSE switch, confirming each 5 mm index on a vial-capper fixture.
Chip clamping
About 45 N of usable force at 0.5 MPa clamps small PCBs or watch parts inside a compact machining jig.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X5S with the ACED16X5S
For a 5 mm nudge stroke, compare the 12 mm bore (42.4 N at 0.5 MPa) if space is tighter, or step up to the 20 mm bore (117.8 N) when the 75.4 N of this 16 mm bore is marginal. The cylinder does not hold position on lost air - add a rod lock or pilot check for a held load. This unit carries the -S magnet for CMSE / DMSE switches, and FA/FB flange or LB foot mounts bolt to the standard face. Order ACED16X5 as the current-production replacement.
Replacement checklist
- ✓ Current-production ACE → ACED16X5S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X5S FAQ
Force is equal in both directions because a rod exits each cover and both strokes use the rod-side area: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, with a maximum of 15.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, port M5x0.8, female rod thread M4x0.7.
The short ISO 21287-class body cuts roughly 50% of the mounting length of an ISO 15552 profile cylinder, and fixed TPU bumpers decelerate both stroke ends. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount directly on the body. The ACPD16X5S is discontinued - the current direct is ACED16X5; confirm ISO 21287 mounting dimensions before ordering.
Request a Quote for the ACED16X5S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X5S replacement — usually within 7-8 hours.