This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED25X100B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD25X100B
The AirTAC ACPD Double Rod Compact Cylinder ACPD25X100B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø25mm bore and 100mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED25X100B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- StatusDiscontinued → ACED25X100B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD25X100B
This double acting compact cylinder pushes a 10 mm rod out of BOTH covers, so the 25 mm bore delivers the same 206.2 N at 0.5 MPa (288.6 N at 0.7 MPa) whether it extends or retracts - both strokes work on the rod-side area. The through-rod resists rotation and side load, gives a symmetric mount, and the rear rod can carry a sensor flag. A fixed TPU bumper sits at each end and speeds run 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs and guarding. The B code gives a male M6x1.0 rod thread; no magnet is fitted on this version, so add the -S code if you later want CMSE or DMSE switches. This model is discontinued - the current direct is ACED25X100; confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD25X100B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD25X100B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED25X100B |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED25X100B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD25X100B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD25X100B Is Used
Symmetric jig clamping
The male M6x1.0 rod thread and equal 206.2 N force in both directions let one cylinder clamp and release a machined housing in a drilling fixture without reversing the mount.
Reciprocating slide drive
A rod on each cover balances the 100 mm stroke on a small pick-and-place slide, where the rear rod carries a flag past a switch position when the -S magnet is ordered.
Pusher on a packaging line
With about 10 kg of vertical-lift margin at 0.5 MPa, the through-rod nudges cartons between conveyor lanes inside guarding too tight for a full-length profile cylinder.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD25X100B with the ACED25X100B
At 206.2 N per side at 0.5 MPa, this 25 mm bore suits clamping and transfer loads up to roughly 12 kg with margin. Step down to ACPD20X for 117.8 N jobs or up to ACPD32X for 345.6 N. If the load must stay put when air is lost, add a rod lock or pilot check - a plain double-rod cylinder drifts. FA/FB flange or LB foot mounts bolt to the standard face, and the optional -S magnet enables CMSE / DMSE switches. Order ACED25X100 as the current-production replacement and verify the ISO 21287 footprint first.
Replacement checklist
- ✓ Current-production ACE → ACED25X100B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD25X100B FAQ
Because a rod exits both covers, force is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, on the rod-side area. Peak output at 1.0 MPa is 42.0 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speeds of 30-500 mm/s, and a fixed TPU bumper at each end.
No - the ACPD family is discontinued. The current-production direct is ACED25X100 (same 25 mm bore, 100 mm stroke and force class, ISO 21287 short body). Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ACP was built to a DIN-standard footprint. FA/FB flange and LB foot options carry over, and the -S magnet code enables CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACED25X100B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED25X100B replacement — usually within 7-8 hours.