This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED25X175SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB
The AirTAC ACPD Double Rod Compact Cylinder ACPD25X175SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø25mm bore and 175mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED25X175SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke175 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- StatusDiscontinued → ACED25X175SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB
Double acting with a rod leaving both covers, the ACPD25X175SB pushes and pulls with identical force because each stroke works on the rod-side area: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in either direction. The 25 mm bore drives a 10 mm through-rod over a 175 mm stroke, which is beyond the 150 mm standard limit for this bore, so it is made to order. A male rod thread (B code) and the optional -S magnet for CMSE / DMSE switches are fitted on this version.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. A fixed TPU bumper sits at each end, and the rear rod can carry a sensor flag. Note: this model is discontinued; the current direct is ACED25X175 - confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED25X175SB |
| Bore size | Ø25 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED25X175SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB Is Used
Reciprocating transfer carriage
The double rod carries guide blocks on both ends of a 175 mm shuttle stroke on a small parts conveyor, delivering 206.2 N in each direction at 0.5 MPa.
Position-flagged test rig
With the -S magnet fitted, CMSE or DMSE switches read end-of-stroke on a bench fixture, while the rear rod drives a second indicator.
Compact ejection station
The short body fits inside a tight machining-cell guard where a full-length profile cylinder will not, ejecting finished bushings from a fixture.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB with the ACED25X175SB
Size between bores: ACPD20X175 gives 117.8 N at 0.5 MPa, while ACPD32X175 reaches 345.6 N - choose the 25 mm when your load sits between those. The through-rod resists rotation and side load and gives a symmetric mount. Remember the piston drifts when air is lost, so add a rod lock or pilot check for held loads. This unit is discontinued; order ACED25X175 as the current-production equivalent and verify the mounting footprint.
Replacement checklist
- ✓ Current-production ACE → ACED25X175SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD25X175SB FAQ
Because a rod exits both covers, output is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a peak of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um.
The 150 mm standard limit for the 25 mm bore is exceeded here, so the 175 mm stroke is a made-to-order build. The ACPD family is discontinued; ACED25X175 is the current ISO 21287 direct with the same bore, stroke and force class - confirm its mounting dimensions before swapping, since the ACP follows the older DIN-standard pattern.
Related AirTAC ACE Cylinders
Request a Quote for the ACED25X175SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED25X175SB replacement — usually within 7-8 hours.