This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED25X200S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD25X200S
The AirTAC ACPD Double Rod Compact Cylinder ACPD25X200S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø25mm bore and 200mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED25X200S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke200 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- StatusDiscontinued → ACED25X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD25X200S
This double acting compact cylinder pushes a rod out of BOTH covers, so the 25 mm bore delivers an identical 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in each direction - the through-rod also resists rotation and side load, and the rear rod can carry a sensor flag. The 200 mm stroke is longer than the 150 mm standard limit for bore 25, so it is a made-to-order build. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted directly on the hard-anodized aluminium body.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and gantries. A fixed TPU bumper sits at each end. Note: the ACPD family is discontinued - the current-production direct is ACED25X200 (same bore, stroke and force class); confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD25X200S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD25X200S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED25X200S |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED25X200S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD25X200S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD25X200S Is Used
Symmetric jig clamping
Equal 206.2 N force in both directions lets one fixture clamp and release a machined housing with identical grip either way, no reverse-bore derating.
Gantry position feedback
The -S magnet plus CMSE or DMSE switches give end-of-stroke signals on a 200 mm pick-and-place gantry where the rear rod carries a second flag.
Packaging line reject pusher
About 124 N of usable thrust at 0.5 MPa nudges off-spec cartons off a conveyor, and the through-rod keeps the pusher plate square under light side load.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD25X200S with the ACED25X200S
At 206.2 N per direction, bore 25 sits between bore 20 (117.8 N) and bore 32 (345.6 N) at 0.5 MPa - step down for lighter tooling, up for heavier clamping. The piston drifts when air is lost, so add a rod lock or pilot check if the load must stay put. FA/FB flange, LB foot, CA/CB clevis and other ISO 21287 brackets bolt straight on, and the -S magnet on this unit pairs with CMSE / DMSE switches. Order ACED25X200 as the current replacement and verify mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACED25X200S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD25X200S FAQ
Because a rod exits both covers, force is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa (rod-side area on every stroke). At 1.0 MPa the bore reaches about 42 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, -20 to +70 C.
200 mm is a non-standard, made-to-order stroke for this bore, so lead time is longer than a catalog length. The ACPD family is discontinued; the current-production successor is ACED25X200 (swap the P for an E), which matches the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP follows the older DIN-standard footprint.
Related AirTAC ACE Cylinders
Request a Quote for the ACED25X200S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED25X200S replacement — usually within 7-8 hours.