This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X110-75S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X110-75S is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-75S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S
This is a double acting compact cylinder with an adjustable extend stroke: the -75 stop screw trims the 110 mm stroke anywhere in a 75 mm window, giving a usable range of 35-110 mm. The 16 mm bore delivers 100.5 N push and 75.4 N pull at 0.5 MPa, rising to 140.7 N at 0.7 MPa, with a theoretical peak of 20.5 kgf at 1.0 MPa. The 110 mm stroke exceeds the 75 mm standard maximum for bore 16, so it is a made-to-order build.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. A fixed TPU bumper sits at both ends, the hard-anodized aluminium body carries an S45C hard-chrome rod, and the -S magnet this model carries lets you bolt on CMSE or DMSE switches. In practice, plan for roughly 60 N (about 6 kgf) of real work at 0.5 MPa, or lift about 5 kg vertically with a 2:1 margin. Note this model is discontinued; the current drop-in is ACEJ16X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-75S |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-75S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S Is Used
Adjustable ejection on assembly fixtures
The 35-110 mm trimming range lets a technician dial in the exact eject position on a jig without changing cylinders, using the 100.5 N push at 0.5 MPa to clear light parts.
Position-verified clamping in test rigs
With the -S magnet fitted, CMSE or DMSE switches confirm extend and retract on an electronics test bench, while the 75.4 N pull retracts the clamp between cycles.
Short-stroke press in lab automation
At 0.7 MPa the bore delivers 140.7 N, enough for light pressing or marking tasks in a compact benchtop unit where the short body saves half the length of a profile cylinder.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S with the ACEJ16X110-75S
Size both ways: if 100.5 N push at 0.5 MPa is marginal for your load, step up to bore 20 for 157.1 N; if it is generous, bore 12 gives 56.5 N in a smaller envelope. The 75 mm adjustment window suits stations where the final extend position is tuned on the machine. Remember the stop screw only shortens the extend stroke - it is not a mid-stroke lock, so the rod can drift if air is lost. FA/FB flange and LB foot mountings fit the ISO 21287 face, and the fitted -S magnet accepts CMSE / DMSE switches. Order ACEJ16X110 as the current-production replacement.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-75S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: an external stop screw shortens the 110 mm extend stroke, so the working range is 35-110 mm. The stop is a mechanical end stop only - on air loss the piston still drifts, so it is not a load-holding brake. The 110 mm stroke is a made-to-order build above the 75 mm standard maximum for bore 16.
The ACPJ family is discontinued. The current-production drop-in is ACEJ16X110 (swap the P for an E), which matches the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard. This -S version carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be mounted for position feedback. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and both ends carry a fixed TPU bumper.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-75S
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-75S replacement — usually within 7-8 hours.