This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X150-30S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X150-30S is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X150-30S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X150-30S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S
This ACPJ16X150-30S is a double acting compact cylinder with an adjustable extend stroke: a stop screw trims the 150 mm stroke down by up to 30 mm, giving a usable range of 120-150 mm. The 16 mm bore delivers 100.5 N push and 75.4 N pull at 0.5 MPa, rising to 140.7 N at 0.7 MPa, with a theoretical ceiling of 20.5 kgf at 1.0 MPa. Its 150 mm stroke exceeds the 75 mm standard limit for bore 16, so it is a made-to-order build. Note this model is discontinued; the current-production drop-in is the ACEJ16X150, so confirm ISO 21287 mounting dimensions before swapping.
The short ISO 21287 body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into slim gantries and guarded cells where a full-length body cannot. Because the -S magnet is fitted, CMSE or DMSE reed and solid-state switches can be clamped directly to the hard-anodized aluminium barrel to report end positions. As a rule of thumb, plan on about 60 N (roughly 6 kg vertical lift) of real work at 0.5 MPa rather than the full 100.5 N rating, and remember the fixed TPU bumpers only decelerate at the ends - they never hold a load if air is lost.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X150-30S |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X150-30S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S Is Used
Small-parts ejection from press dies
The 100.5 N push at 0.5 MPa is enough to kick stamped clips or bushings out of a light die, and the 120-150 mm adjustable reach lets the setter dial the ejector travel to the die depth without changing cylinders.
Position-checked gate on a packaging line
With the -S magnet fitted, CMSE or DMSE switches confirm the gate is fully open or closed; the 150 mm stroke slides a diverting plate across a conveyor lane at up to 500 mm/s.
Sample tray indexing in a lab autosampler
The compact body, about 50% shorter than an ISO 15552 profile cylinder, fits inside a benchtop enclosure, while the 30 mm trim window lets technicians shorten the 150 mm advance to match tray pitch.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S with the ACEJ16X150-30S
Size between bores if this one sits near a limit: the 12 mm bore pushes only 56.5 N at 0.5 MPa, while the 20 mm bore reaches 157.1 N, so the 16 mm at 100.5 N suits mid-range clamping and positioning. The 30 mm window means your fixture can accept a stop anywhere from 120 mm to 150 mm of extend travel; the adjuster is a mechanical end stop, not a mid-stroke lock. FA/FB flange or LB foot mounts and the female M4x0.7 rod thread bolt into standard ISO 21287 fixtures. Since ACPJ is discontinued, order the ACEJ16X150 as the current equivalent and verify the mounting footprint against your drawing.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X150-30S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-30S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa those rise to 140.7 N and 105.6 N, with a theoretical maximum of 20.5 kgf at 1.0 MPa. The -30 code gives a 30 mm adjustment window, so the extend stroke can be trimmed anywhere between 120 mm and 150 mm with the stop screw. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the 150 mm stroke is a made-to-order length since bore 16 normally tops out at 75 mm.
The ACPJ family is no longer in production; the current drop-in is the ACEJ16X150, which keeps the same bore, stroke and force class in the ISO 21287 short-body format. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ACP was built to a DIN standard. This unit already carries the optional -S magnet, so CMSE and DMSE reed or solid-state switches can be mounted on the barrel for end-of-stroke detection.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X150-30S
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X150-30S replacement — usually within 7-8 hours.