Airtac ACQD Double Acting Compact Cylinder ACQD12X5
The AirTAC ACQD Double Acting Compact Cylinder ACQD12X5 is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø12mm bore and 5mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ12 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM3×0.5 (F) / M5×0.8 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD12X5
The AirTAC ACQD12X5 is a double-acting JIS compact cylinder featuring twin rods that exit both ends of its riveted body. Because a rod occupies each chamber, the effective annular area is identical in both directions. This means push and pull forces are perfectly equal, delivering 42.4N at 0.5MPa and 59.4N at 0.7MPa. The dual-rod architecture inherently resists rotation and provides an extended guide length, allowing it to carry a small tool platform without needing a separate external guide.
This 12mm bore model includes a fixed TPU elastomer bumper at each end to decelerate the load near stroke extremes, rather than relying on adjustable air cushions. It uses an M5x0.8 port and a female M3x0.5 rod-end thread. While the body retains magnetic-switch grooves, this specific unit ships without a magnet. Note that a plain double-rod cylinder drifts when air is lost; a pilot-operated check valve or external rod lock is required for fail-safe load holding.
Airtac ACQD Double Acting Compact Cylinder ACQD12X5 Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD12X5 |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø12 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod end thread | M3×0.5 female / M5×0.8 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø12mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 42 N | 42 N |
| 0.7 MPa | 59 N | 59 N |
| Max (@1.0 MPa) | 9 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD12X5
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 12 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD12X5 Is Used
Micro-Clamp Actuation
Drives a tiny synchronous clamping jaw in electronics assembly, relying on the twin rods to prevent jaw twist during the grip cycle.
Dual-Sensor Pick-Place
Uses the second rod end to mount a sensor flag for a pick-and-place head, ensuring precise end-of-travel detection on a packaging line.
Symmetric Transfer Arm
Powers a small transfer arm in a textile machine where equal push and pull forces are required to maintain balanced tension during part handoff.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD12X5 the Right Cylinder?
When sizing this 12mm bore actuator, consider the neighbouring 16mm option for higher thrust. The 16mm bore provides 75.4N at 0.5MPa, whereas this ACQD12X5 yields 42.4N both ways. If your mechanism only requires one-sided pushing and you can tolerate unequal forces, a standard single-rod ACQ might suffice. However, if your fixture demands strict anti-rotation tracking or symmetric dual-station actuation, this twin-rod format is the correct choice. To order, confirm the 5mm stroke, M5x0.8 port, and female M3x0.5 thread.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD12X5 FAQ
The ACQD12X5 delivers equal push and pull forces of 42.4N at 0.5MPa and 59.4N at 0.7MPa, with a maximum force of 9kgf at 1.0MPa. Push equals pull because the twin rods create identical annular areas on both sides. The standard stroke limit is 50mm, and operating pressure ranges from 0.15-1.0MPa.
No, it uses fixed TPU elastomer bumpers at both ends for deceleration instead of adjustable air cushions. While the body features magnetic-switch grooves compatible with reed or solid-state sensors, this specific model ships without a magnet. For high-speed applications, add an external shock absorber to manage impact energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD12X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.