
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X300-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 300mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X300-100B is a double-acting, double-rod JIS compact cylinder built for applications requiring a long 300 mm stroke with on-machine extend tuning. An external M12x1.25 threaded stop and lock nut lets you shorten the forward stroke by up to 100 mm, yielding a usable extend range of 200 to 300 mm. The retract distance remains fixed at 300 mm.
This made-to-order variant exceeds the 100 mm standard stroke maximum for a 32 mm bore, extending into the 300 mm long-stroke category. It features a male M14x1.5 rod-end thread for direct load coupling, a PT1/8 port, and fixed NBR elastomer bumpers at both ends rather than adjustable air cushions. The body includes magnetic-switch grooves, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X300-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 300 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact extend stop between 200 and 300 mm on machining centers when swapping out part fixtures, avoiding the need to physically swap cylinder hardware.
Fine-tune the pusher rod extension on packaging lines to accommodate varying carton widths on the fly without changing out the entire actuator assembly.
Safely test different end positions for pressing or seating components during new product line commissioning by simply turning the external stop screw.
A fixed-stroke ACQ is sufficient if the extend endpoint never needs field adjustment. Confirm your ordering essentials: 32 mm bore, 300 mm full stroke, 100 mm adjuster window, male rod thread (-B), and no magnet. Note that standard bore 32 strokes max out at 100 mm, so this 300 mm version is a long-stroke configuration.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
This cylinder has a 32 mm bore and a 300 mm full stroke. The adjustable extend window is 100 mm, allowing a usable extend range of 200 to 300 mm.
An external M12x1.25 threaded stop with a lock nut limits the extend distance without altering the piston area, so force remains unchanged. The retract stroke is unaffected. Deceleration relies on fixed NBR elastomer bumpers at both ends, not adjustable air cushions, so external shock absorbers are recommended for high-energy loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.