verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQJ Series · JIS Compact Adjustable-Stroke Cylinder

Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B

The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 75mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.

  • BoreØ32 mm
  • Full stroke75 mm
  • Port sizePT1/8
  • Adjuster threadM12×1.25
$48.14 $55.64Save 13% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQJ32 stroke, mounting and version on one page All ACQJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B

The AirTAC ACQJ32X75-40B is a double-acting JIS compact cylinder featuring a male-thread piston rod end (M14x1.5) that couples directly to your load. An external threaded stop with a lock nut limits the EXTEND end position, allowing you to fine-tune the usable extend range from 35 up to 75 mm without swapping parts. The RETRACT stroke remains completely unaffected.

The unit relies on a fixed NBR elastomer bumper at each end for deceleration rather than an adjustable air cushion. Body sensor grooves are integrated, though this specific configuration ships without a magnet.

Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B Technical Specifications

ModelAirtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B
SeriesACQJ JIS compact adjustable-stroke cylinder
Bore sizeØ32 mm
Full stroke75 mm
Adjuster threadM12×1.25
Port sizePT1/8
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
Rod threadM8×1.25 (F) / M14×1.5 (B)

Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa302 N302 N
0.7 MPa422 N—
Max (@1.0 MPa)62 kgf

ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.

Model Code: Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B

ACQJJIS compact double-acting ADJUSTABLE-STROKE cylinder series.
32Bore size in mm.
×75Full stroke length in mm.
-0Adjustable window in mm (extend stroke can be shortened by up to this).
S / BMagnet (S) / male-thread rod (B); omit for none / female thread.

Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).

Where the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B Is Used

precision_manufacturing

Product Changeover Stops

Adjust the extend end position on packaging lines when switching carton sizes, using the external stop to set new push distances instantly.

view_module

Trial End Positions

Dial in the exact clamping depth on automated test fixtures without machining new spacers or changing the cylinder body.

factory

Setup-Varying Fixtures

Fine-tune the extend stroke on welding equipment to accommodate varying material thicknesses directly on the machine.

Is the Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B the Right Cylinder?

If your end position never varies, a fixed-stroke ACQ cylinder suffices. When ordering, confirm the 75 mm full stroke, the 40 mm adjustment window, the male rod thread (M14x1.5), and the PT1/8 port. Note that a plain ACQ-type does not hold its load on air loss; for a fail-safe hold, specify an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine end-position tuning?
  • ✓ Full stroke and adjust window (mm)
  • ✓ Force at your working pressure
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the adjuster nut after setting the stop.
  • check The stop limits the EXTEND stroke only.
  • check Avoid side load on the short piston rod.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B FAQ

The usable extend range is 35-75 mm (75 mm full stroke minus up to a 40 mm window).

The M12x1.25 external threaded stop with lock nut limits the extend stroke length only; it does not change piston area or force. Deceleration relies on a fixed elastomer bumper, not an adjustable air cushion. For high-energy cycles, slow the approach or add an external shock absorber.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQJ Compact Cylinders

Request a Quote for Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X75-40B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQJ32X75-40B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.