The AirTAC AFR Air Filter Regulator AFR2000M2WT is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The AirTAC AFR2000M2WT is a compact A-line filter-regulator that cleans compressed air and regulates downstream pressure in one body. The M in the code means this unit uses a manual drain, so the condensate bowl is emptied by hand as part of routine checks rather than relying on the default differential-pressure drain. The W selects the finer 5 um filter element instead of the standard 40 um grade, and the trailing 2 means the included gauge reads in psi. Threads are NPT, the US-preferred option, on the 1/4 in (2000) size. Max inlet pressure is 1.0 MPa (145 psi), regulation range is 0.15-0.9 MPa (20-130 psi), and the push-to-lock self-locking knob holds the setpoint. Temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC compact A/B-line part. The same body family is also offered in 1/8 in, 3/8 in and 1/2 in ports, with PT and G (BSPP) threads available to order. Rated flow is not published as a single figure, so ask us to confirm the datasheet flow and sizing figures for your application.
| Model | Airtac AFR Air Filter Regulator AFR2000M2WT |
|---|---|
| Type | Filter Regulator |
| Line | A-line (compact A/B air preparation) |
| Port size | PT1/4" (NPT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
This is the spec to pick when your install calls for NPT threads, a fine 5 um element and manual draining, all in the compact 1/4 in A-line body; the same body can be ordered with PT or G threads, a 40 um element, an automatic drain (suffix A) or the default differential-pressure drain. The included gauge here is psi-scaled; MPa, bar and kgf/cm2 & psi scales are the other orderable options, and the larger B-line bodies cover bigger air demand. Because flow is not a single published rating, send us your required flow and we will confirm the datasheet figure before you order.
Plumbed into the instrument-air drop serving laboratory analyzers or sample-handling hardware, the 5 um element removes finer particulate before the gas reaches sensitive pneumatic metering components.
Installed at the branch feeding a control panel's pneumatic relays and pilots on a US-spec NPT air system, it filters the supply and lets technicians read and lock the set pressure in psi.
Mounted on the shop-air drop above a workholding fixture bench, it delivers cleaner air to clamping circuits with a manual drain routine that suits light, supervised duty.
AirTAC does not publish rated flow as a single number for the compact A/B line, so we will not quote one here. Share your line pressure and air demand and we will confirm the datasheet flow figures for this 1/4 in unit on request before you order.
M means condensate is emptied by hand rather than by the default differential-pressure drain, which suits attended or lightly loaded installations. W upgrades the element from the standard 40 um to a finer 5 um grade for applications that need cleaner air downstream.