The AirTAC AFR Air Filter Regulator AFR2000MJ1 is a genuine A/B-line filter regulator with PT1/4" ports. It is the compact air-preparation line, regulating 0.15 - 0.9 MPa (20 - 130 psi) with a push-to-lock knob. Flow is confirmed from the datasheet on request.
The AFR sub-family is AirTAC's compact A-line filter regulator: one body that removes water and particulate from compressed air and then regulates downstream pressure. This 2000-size unit is threaded PT1/4 and carries the standard 40 um filter element. The M suffix specifies a manual drain, so condensate is drained from the PC bowl by hand during routine checks. The trailing 1 pairs the unit with an MPa-scale pressure gauge, and the push-to-lock self-locking adjustment knob holds the set pressure between 0.15 and 0.9 MPa (20-130 psi). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the compact A/B line, available in 1500 (1/8 in), 2000 (1/4 in), 3000 (3/8 in) and 4000 (1/2 in) port sizes. Rated flow is not published as a single figure for these units, so ask us to confirm sizing and datasheet figures for your operating conditions before ordering.
| Model | Airtac AFR Air Filter Regulator AFR2000MJ1 |
|---|---|
| Type | Filter Regulator |
| Line | A-line (compact A/B air preparation) |
| Port size | PT1/4" (PT thread) |
| Filter grade | 40 um standard, 5 um optional (W) |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) (low-pressure type to 0.4 MPa) |
| Fluid | Compressed air |
|---|---|
| Max. inlet pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 C (non-freezing) |
| Bowl material | PC (polycarbonate) |
| Pressure drop | Low (catalogue-stated) |
Specifications follow the official AirTAC A/B-line air-preparation data. Drain type, filter grade, gauge and low-pressure options are set by the model-code suffix - see the description. Flow curves, weight and outline dimensions are not published in our data set — ask us and we confirm from the factory datasheet.
Choose the A-line 2000 body when your circuit is built around 1/4 in PT ports and the compact frame suits your demand; step up to the B-line or the 3000 and 4000 sizes for larger circuits, or down to 1500 for 1/8 in lines. Drain choice is real: the default is a differential-pressure drain, M (as on this model) is manual draining, and A is automatic. Filtration is 40 um standard or 5 um with the W option. The regulator comes as the standard type (set 0.15-0.9 MPa) or the L low-pressure type capped at 0.4 MPa; gauge scales are MPa, psi, bar or kgf/cm2 & psi, and N deletes the gauge. PT is the standard thread, with G (BSPP) and NPT available to order. Because flow is not a single rated figure, send us your pressure and demand so we can confirm the correct size before you order.
Feeds atomizing air to spray guns in a finishing booth; the 40 um element and manual drain keep water out of the paint line while the regulator sets gun pressure.
Sets a stable working pressure for the pick-and-place cylinders on a carton-sealing machine so sealing heads and grippers repeat consistently.
Supplies filtered, regulated air to the clamping circuit on a CNC fixture, with the MPa gauge giving a direct read of clamp pressure at the machine.
AirTAC does not publish rated flow for this compact filter regulator as a single figure, and we will not guess one. Tell us your line pressure and air demand and we will confirm the correct size and the datasheet flow figures for the AFR2000 frame on request.
M specifies the manual drain: condensate collects in the PC bowl and is emptied by hand, in place of the default differential-pressure drain arrangement. An A suffix would instead select the automatic drain option.