Airtac AF1500/2000 Filter AF2000G
Genuine AirTAC air filter, order code AF2000G from the AF-BF range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
- Model and portAF2000 · PT1/4
- DrainDifferential + manual drain
- Element · thread40 µm element · G thread
- ModelsAF1500, AF2000, BF2000, BF3000, BF4000
- PortAF1500: PT1/8, AF2000: PT1/4, BF2000: PT1/4, BF3000: PT3/8, BF4000: PT1/2
- ThreadPT (standard), G, NPT (T)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac AF1500/2000 Filter AF2000G
The AF2000G is AirTAC's A-line compressed-air filter with the code built on the AF2000 body: a PT1/4 port size ordered with the G suffix, so the connections are G thread instead of the standard PT. Inside is the standard 40 um filter element that captures bulk contaminants before they reach valves and cylinders downstream.
The air sits in a 15 cc drain bowl rated for 0.15 to 1.0 MPa (20 to 145 psi) working pressure with 1.5 MPa (215 psi) proof pressure, and the fluid temperature range is -5 to +70 C with no freezing. Drainage on this code is differential plus manual, so condensate is released by hand at service intervals rather than collected automatically.
Airtac AF1500/2000 Filter AF2000G Technical Specifications
| Order code | AF2000G |
|---|---|
| Product | Air Filter |
| Model and port | AF2000 · PT1/4 |
| Drain | Differential + manual drain |
| Element · thread | 40 µm element · G thread |
| Models | AF1500, AF2000, BF2000, BF3000, BF4000 |
|---|---|
| Port | AF1500: PT1/8, AF2000: PT1/4, BF2000: PT1/4, BF3000: PT3/8, BF4000: PT1/2 |
| Thread | PT (standard), G, NPT (T) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Drain bowl capacity | A1500/A2000: 15 cc · B2000/B3000: 40 cc · B4000: 60 cc |
| Fluid | Air |
| Operating pressure | 0.15 – 1.0 MPa (20 – 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
Source: AirTAC AF/BF series datasheet (p.283, 2025-11 edition, airtac.com), ordering code and specifications.
How to choose
Within the AF2000 family, the thread suffix is the deciding letter: AF2000 gives PT thread as standard, AF2000G gives G thread, and AF2000T switches to NPT (T). Pick this G-thread code when your piping hardware, gauge ports or machine standards call for parallel G fittings. If you need finer 5 um filtration instead of the standard 40 um element, that is the AF2000W sibling, and larger B-line ports and a 40 cc bowl move you up to BF2000.
Applications
Machine tool air preparation
Feeds filtered 0.15 to 1.0 MPa air to machine tool valve stacks through PT1/4 ports, with G thread matching the parallel fittings specified on imported equipment.
Packaging machine supply line
The 40 um element and 15 cc bowl remove bulk moisture and debris ahead of packaging machine actuators, with manual draining during shift changeovers.
Valve island inlet protection
Installed upstream of PT1/4-connected directional valves, where G-thread piping makes the filter interchangeable with the rest of a G-threaded manifold.
FAQ
What are the key figures of the AF2000G?
Port: PT1/4 size ordered with G thread. Element: 40 um (standard). Bowl capacity: 15 cc. Operating pressure: 0.15 to 1.0 MPa (20 to 145 psi). Proof pressure: 1.5 MPa (215 psi). Temperature: -5 to +70 C, no freezing. Fluid: air. Drain: differential plus manual.
What does the G in the AF2000G order code change, and does it affect the drain?
The G suffix changes only the thread type: this AF2000-size filter is supplied with G thread instead of the standard PT. Port size stays PT1/4 and the element stays the 40 um standard. Drainage remains differential plus manual on this code; B-line units are the ones that can take the A option for an automatic drain.