Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU
The AirTAC Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU is a genuine double acting + cushion standard round-body mini air cylinder with a Ø0mm bore and 200mm stroke, PT/G air ports and a stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service. A variable air cushion at both ends lets you tune end-of-stroke deceleration on site.
- BoreØ0 mm
- Stroke200 mm
- Port sizePT/G
- Acting typeDouble acting + cushion
- Rod thread
- CushionVariable air cushion, both ends
About the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU
One of the strongest mini cylinders in the AirTAC round-body line, the MAC63X200SU pushes 1557.9 N at 0.5 MPa - enough for about 79 kg of vertical lift at a 2:1 margin - and pulls 1457.4 N on the return. Double acting throughout: air extends and retracts the rod, and needle-adjustable cushions at both ends let you slow the last millimetres so heavy parts settle instead of slam. The rolled stainless barrel and hard-chrome carbon-steel rod take washdown and humid plant air in stride, where painted minis bubble and rust.
Because the magnet comes built in as standard, position feedback via CMSG, DMSG or EMSG switches needs no special piston order. The U flat-end back cover presents a flat machined face for direct bolting to machine plates or fixed brackets, sparing you adapter blocks. A 200 mm stroke on a 16 mm rod rewards careful alignment: keep side loads low or add external guides.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU Technical Specifications
| Model | Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU |
|---|---|
| Series | MAC mini cylinder |
| Bore size | Ø0 mm |
| Stroke | 200 mm |
| Acting type | Double acting + cushion |
| Port size | PT/G |
| Rod thread |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MA-series datasheet. Barrel: stainless-steel tube (round-body, riveted rolling-packed construction); piston rod: carbon steel with 20µm hard-chrome plating; covers: aluminium alloy. Thread options: PT (blank) / G / NPT. Every MA-series cylinder ships with a built-in magnet for CMSG / DMSG / EMSG position sensors.
Theoretical Output Force (Ø0mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 0 N | 0 N |
| 0.7 MPa | 0 N | 0 N |
| Max (@1.0 MPa) | 0 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU
| MAC | Standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 0 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Built-in magnet for CMSG / DMSG / EMSG sensors (standard on MA series). |
| CA / U / CM | Back-cover type: CA pivot, U flat-end, CM round-end. |
MA-family variants: MA / MAC (double acting ±cushion), MSA / MTA (single acting push / pull), MAD / MACD (double rod ±cushion), MAJ / MACJ (adjustable stroke ±cushion), MAR (cushioned with integrated F/U mount). Mounting accessories: FA flange, LB foot, SDB pivot; plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU Is Used
Carton push-off on palletisers
1558 N at 0.5 MPa shoves stacked cartons clear of a roller conveyor within the 200 mm window; cushioned ends stop the stack gently at high cycle rates.
Slide gate actuation on grain hoppers
Opening and closing heavy slide gates on hoppers or silos - the stainless barrel stands up to dust, condensation and outdoor weather year round.
Bench-top pressing of bushings
Around 159 kgf of push at 0.5 MPa presses bushings and pins into housings on assembly benches; the 30-800 mm/s speed range covers both careful and quick cycles.
Is the Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU the Right Cylinder?
Need less? The 50 mm bore delivers 981.3 N at 0.5 MPa in the same round-body family; for more than 1557.9 N you would step outside the MAC series, since 63 mm is its largest bore. Keep in mind the piston coasts freely once air is removed - the cushions only brake the end of travel - so a pilot check valve or rod lock is the fix for held loads. FA flange, LB foot and SDB pivot brackets cover fixed and pivoted frames, and the standard on-board magnet pairs with CMSG, DMSG and EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) is standard for sensors
- ✓ Back cover (CA/U/CM) & mount (FA/LB/SDB)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion screws and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU FAQ
Bore 63 figures: 1557.9 N push and 1457.4 N pull at 0.5 MPa; 2181 N push and 2040.3 N pull at 0.7 MPa; theoretical peak 317.7 kgf at 1.0 MPa. Ports are 1/4", rod thread M14x1.5, working pressure 0.15-1.0 MPa (22-145 psi), speed 30-800 mm/s.
The U flat-end back cover bolts flat to machine faces, while FA flange, LB foot or SDB pivot brackets handle other mount styles; I and Y rod knuckles are also available. Every cylinder includes a built-in magnet as standard, so CMSG, DMSG and EMSG switches mount directly for stroke-end signalling - no special-order piston required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B01-MAC Series Special Purpose Cylinder B01-MAC63X200SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.