Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S
The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 150mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke150 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S
The B04-SAUD100X150S is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD100X150S, mechanically identical to the base model. A rod exits both ends on one piston, meaning both faces use the rod-side area. Output force is equal in both directions at 3681 N each way at 0.5 MPa. It features a 1/2 inch port and an M20x1.5 rod thread.
This extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same bore. The twin rods provide anti-rotation guidance for heavy equipment, while the back rod can carry a sensor cam. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG switches. A Viton H seal option raises the operating temperature to 150 C.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S Technical Specifications
| Model | Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S Is Used
Excavator Linkage
Drives synchronized twin-tool attachments on heavy equipment with equal push and pull force.
Crusher Feed Gate
Provides non-rotating anti-twist guidance for heavy material flow control in quarry machinery.
Paver Sled Actuator
Uses the back rod to trip a limit switch, confirming stroke completion in dusty environments.
Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S the Right Cylinder?
Size both ways using the equal-force figures: the 80 mm bore provides 2268 N at 0.5 MPa, while this 100 mm bore delivers 3681 N. Choose a double-rod cylinder when your construction machinery needs anti-rotation stability, twin tooling, or back-end sensing. Mounting is limited to Basic, FA, and LB types, matching the AirTAC SC series. The -S magnet allows electronic or reed switch integration. For this 150 mm stroke, external load guides are recommended to prevent side-loading damage to the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S FAQ
The B04- prefix denotes the construction-machinery dedicated variant of SAUD100X150S, sharing identical specs. Force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. It uses a 1/2 inch port.
No. A plain double-rod cylinder drifts without live air. The adjustable 29 mm cushions only decelerate near stroke end. For secure load holding on construction equipment, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.