
The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X225S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 225mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The B04-SAUD100X225S is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as a construction-machinery dedicated variant, mechanically identical to the SAUD100X225S. Because a rod exits both ends, the push and pull force is equal at 3681 N each way at 0.5 MPa. The extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same bore.
This 100 mm bore unit features a 1/2 inch port and a 25 mm rod. With a 225 mm stroke, the adjustable 29 mm cushions decelerate smoothly at both ends. The built-in magnet (-S) supports CMSG, DMSG, and EMSG switches. For high heat environments, a Viton H seal option extends operation to 150 C.
| Model | Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X225S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Drives synchronized twin-tooling on heavy equipment linkages where equal push and pull force prevents twisting under load.
Provides non-rotating linear actuation for positioning rigging hardware, using the back rod to trip limit switches.
Regulates diverter gates on concrete pumps, relying on the compact profile barrel to fit tight machinery frames.
Size this 100 mm bore against the 80 mm option (2268 N both ways at 0.5 MPa) or step down further to the 63 mm bore (1402 N). Choose this double-rod configuration when your construction machinery needs anti-rotation guidance, synchronized twin-tool driving, or back-end switch actuation. Mounting is limited to Basic, FA, and LB styles, matching the AirTAC SC series. At a 225 mm stroke, external load guides are recommended to prevent side-load binding. Note that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
The 100 mm bore has a 1/2 inch port and a 25 mm rod. Because it is a double-rod cylinder, force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The B04- prefix simply designates construction-machinery dedication without altering these physical specs.
The dual-rod design prevents piston rotation, allows driving two tools at once, and lets the back rod carry a sensor cam. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG reed and electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.