Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600
The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 600mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke600 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600
The B04-SAUD100X600 is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD100X600, meaning it is mechanically identical to the base model but intended for heavy-equipment builders. Because the rod exits both ends, the output force is perfectly symmetrical, delivering 3681 N each way at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore.
With a 100mm bore, 25mm rod, and a 1/2" port, this cylinder provides robust performance. Note this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. For high-heat environments, a Viton H seal option extends operation to 150 C.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600 Technical Specifications
| Model | Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600 Is Used
Excavator Panel Pusher
Drives heavy cab panels on construction machinery with equal push and pull force, preventing twist during synchronized forming operations.
Loader Boom Sync
Uses the double-rod symmetry to balance heavy boom extensions on earthmoving equipment without relying on external mechanical guides.
Twin-Tool Actuation
Carries a stamping tool on the front rod and a secondary clamp on the back rod for simultaneous heavy-equipment chassis fabrication.
Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600 the Right Cylinder?
Select this 100mm bore if your application requires the 3681 N equal-both-ways force. For lighter duties, the 80mm bore provides 2268 N, while no larger standard bore exists in this series. A double rod is the right call when you need anti-rotation guidance, twin-tool driving, or a back-end rod to trip a switch. Mounting is limited to Basic, FA, and LB styles, matching the AirTAC SC series. Because the 600mm stroke exceeds 300mm, you must support the load with external guides to prevent rod bending and side-load damage. Finally, this non-magnet SKU cannot host sensors; if position feedback is needed, choose the -S version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600 FAQ
This 100mm bore cylinder has a 25mm rod, a 1/2" port, and an M20x1.5 rod thread. Because it is a double-rod design, the force is equal both ways: 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The B04- prefix simply marks it as the construction-machinery dedicated variant of the SAUD100X600.
No to both. This SKU lacks a magnet, so it cannot accept magnetic sensors. Additionally, a plain double-rod cylinder drifts on air loss; the adjustable 29mm cushions only decelerate near stroke end. For a held vertical load, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD100X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.