verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S

The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S is a genuine double-acting profile-type standard air cylinder with a Ø40mm bore and 350mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ40 mm
  • Stroke350 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 21 mm
$101.65 $109.15Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S

The B04-SAUD40X350S is a double-acting double-rod profile cylinder. The B04- prefix marks this as AirTAC's construction-machinery dedicated variant of the SAUD40X350S, mechanically identical to the base model. A rod exits both ends on one piston, so both faces use the rod-side area. This means push and pull force are equal, delivering 528 N each way at 0.5 MPa. The extruded aluminium profile barrel is shorter than an ISO 15552 cylinder of the same bore.

Because both ends carry a rod, the output force is equal in both directions. Use it for non-rotating anti-twist guidance or to drive twin tools. The back rod can carry a sensor cam or trip a switch. The -S option includes a built-in magnet for CMSG, DMSG or EMSG switches. The 1/4" port, Viton H high-temperature seal option up to 150 C, and 350 mm stroke make it highly versatile.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S Technical Specifications

ModelAirtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S
SeriesSAU profile-type cylinder
Bore sizeØ40 mm
Stroke350 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S

SAUProfile-type standard cylinder series.
40Bore size in mm.
×350Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S Is Used

construction

Excavator Panel Pusher

Synchronized twin rods push and pull cab panels on heavy equipment without twisting.

precision_manufacturing

Loader Arm Stopper

Equal force both ways drives a mechanical stopper cam on construction machinery arms.

settings

Crane Valve Trip

The back rod carries a cam to trip a limit switch for crane hydraulic valve control.

Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S the Right Cylinder?

Size both ways: the 32 mm bore gives 345 N each way at 0.5 MPa, while the 50 mm bore gives 825 N. Choose this 40 mm double-rod model when your application demands anti-rotation, twin tooling, or back-end sensing. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. The -S magnet supports CMSG, DMSG, and EMSG sensors. Because the stroke is 350 mm, add external guides to prevent rod bending under side loads. A plain cylinder does not hold load without live air; use an external rod lock or pilot-operated check valve for secure holding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S FAQ

Force is equal both ways because both faces lose rod area: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and 950 N at 0.9 MPa. The bore is 40 mm with a 1/4" port and a 16 mm rod. The B04- prefix denotes the construction-machinery dedicated variant, sharing the exact same physical specs as the SAUD40X350S.

The double-rod design provides equal force both ways, prevents rotation, and lets the back rod carry a sensor cam. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The extruded profile barrel is shorter than an ISO 15552 cylinder of the same bore.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD40X350S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for B04-SAUD40X350S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.