Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S
The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S is a genuine double-acting profile-type standard air cylinder with a Ø50mm bore and 100mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ50 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S
The B04-SAUD50X100S is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant, mechanically identical to the SAUD50X100S. It features a 50mm bore, 100mm stroke, and a 1/4 inch port. Because a rod exits both ends, the output force is equal in both directions, delivering 825 N each way at 0.5 MPa.
This extruded aluminum profile body is shorter than an ISO 15552 cylinder of the same bore. The rear rod can carry a sensor cam, and the included -S magnet supports CMSG, DMSG, or EMSG switches. A plain cylinder drifts without live air, so use an external rod lock for holding.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S Technical Specifications
| Model | Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S
| SAU | Profile-type standard cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S Is Used
Excavator Valve Control
Synchronizes dual pilot valves on heavy machinery using equal push and pull forces without rotational twist.
Crusher Feed Diverter
Flips aggregate chutes on screening plants where the rear rod trips a limit switch to confirm position.
Track Tensioner Actuator
Drives twin opposing wedges on undercarriage assemblies, leveraging the compact profile to fit tight chassis spaces.
Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S the Right Cylinder?
Select this 50mm bore when you need 825 N of equal force both ways. Step down to the 40mm bore for 528 N, or up to the 63mm bore for 1402 N if your construction equipment needs more power. A double rod is the right call for anti-rotation guidance, driving twin tooling, or mounting a rear switch cam. Mounting fits AirTAC SC series FA and LB brackets. The -S magnet allows CMSG/DMSG/EMSG sensors. For this 100mm stroke, side loads are minimal, but always guide the load externally on longer strokes to prevent binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S FAQ
The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD50X100S, with identical specs. Force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and 1484 N at 0.9 MPa. It uses a 1/4 inch port and M16x1.5 rod thread.
No, a plain cylinder drifts without live air; the air cushion only decelerates near stroke end. Use an external rod lock or pilot-operated check valve for holding. The -S magnet allows CMSG, DMSG, or EMSG switches to mount directly on the profile body.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.