Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150
The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150 is a genuine double-acting profile-type standard air cylinder with a Ø50mm bore and 150mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ50 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150
The B04-SAUD50X150 is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD50X150, mechanically identical to the base unit. A rod exits both ends, meaning both faces use the rod-side area and output force is equal in both directions. This bore delivers 825 N each way at 0.5 MPa, rising to 1154 N at 0.7 MPa, with a 1/4" port and M16x1.5 rod thread.
The extruded aluminium profile barrel is shorter than an ISO 15552 cylinder of the same bore. The twin rods provide anti-rotation guidance and let you drive two tools at once. Because this SKU lacks the -S magnet, it cannot take a magnetic switch.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150 Technical Specifications
| Model | Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø50 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150
| SAU | Profile-type standard cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150 Is Used
Excavator Valve Banks
Synchronizes twin-tool actuation on heavy-equipment hydraulic test stands with equal push and pull force.
Crane Component Gauging
Uses the rigid double-rod anti-twist geometry to push and pull heavy-duty measurement fixtures without deflection.
Loader Assembly Jigs
Holds and shifts construction-machinery weldments with a compact profile barrel that saves machine space.
Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150 the Right Cylinder?
Choose this 50 mm bore if you need 825 N of equal bidirectional force. Step down to the 40 mm bore for 528 N, or up to the 63 mm bore for 1402 N, both also equal both ways. A double rod is the right call for construction-machinery rigs needing anti-rotation stability or twin-tool driving. Mounting is limited to Basic, FA flange, and LB foot brackets, matching the AirTAC SC series. At 150 mm stroke, mount external guides to absorb side loads. Remember that without the -S option, this cylinder cannot host CMSG or DMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150 FAQ
The B04- prefix denotes the construction-machinery dedicated variant of the SAUD50X150, sharing the exact same physical specs. Force is equal both ways because rods exit both ends: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and 1484 N at 0.9 MPa. The port is 1/4".
No to both. The air cushion only decelerates near stroke end; it does not lock. On air loss the piston drifts, so use an external rod lock or pilot-operated check valve for holding. Also, this SKU lacks the -S magnet and cannot take CMSG or DMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.