
The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X175S is a genuine double-acting profile-type standard air cylinder with a Ø50mm bore and 175mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The B04-SAUD50X175S is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD50X175S, mechanically identical to the base model. A rod exits both ends on one piston, meaning both faces use the rod-side area. Output force is equal in both directions at 825 N each way at 0.5 MPa. The extruded aluminium profile barrel makes it shorter than an ISO 15552 cylinder of the same bore. It uses a 1/4 inch port and an M16x1.5 rod thread.
This unit includes a built-in piston magnet (-S) for CMSG, DMSG or EMSG switches. Adjustable air cushions of 21 mm decelerate the load at stroke ends. For high-temperature environments up to 150 C, Viton H seals are available.
| Model | Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X175S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø50 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 825 N | 825 N |
| 0.7 MPa | 1155 N | — |
| Max (@1.0 MPa) | 168 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Drives cab sheet metal panels on a construction machinery line with equal force both ways, preventing twist during the forming stroke.
Shifts an excavator track guide arm laterally using twin rods, ensuring synchronized movement and stable positioning under vibration.
Uses the protruding back rod to trip a CMSG reed switch, confirming full retraction of a heavy-equipment latch mechanism.
Size this 50 mm bore against its neighbours: the 40 mm yields 528 N both ways, while the 63 mm provides 1402 N both ways at 0.5 MPa. Choose a double-rod cylinder when your application demands anti-rotation guidance, synchronized twin-tool driving, or back-end sensor cam tripping. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. At a 175 mm stroke, side loads are moderate but always support the load with an external guide to prevent binding. The -S magnet allows solid switch mounting. A plain cylinder drifts on air loss; the cushion only decelerates, so fit an external rod lock or pilot-operated check valve for held loads.
Quick checklist
Force is equal both ways because it is a double-rod cylinder. It delivers 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and 1484 N at 0.9 MPa. The bore is 50 mm, the port is 1/4 inch, and the rod thread is M16x1.5.
The B04- prefix designates this as a construction-machinery dedicated variant of the SAUD50X175S, with no mechanical changes to the specs. The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.