verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225

The AirTAC B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225 is a genuine double-acting profile-type standard air cylinder with a Ø50mm bore and 225mm stroke, 1/4" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ50 mm
  • Stroke225 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 21 mm
$99.07 $106.57Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225

The B04-SAUD50X225 is an AirTAC double-acting, double-rod profile cylinder. The B04- prefix marks this as the construction-machinery dedicated variant of the SAUD50X225, sharing exact mechanicals. A rod exits both ends, yielding equal push and pull force of 825 N each way at 0.5 MPa. It uses a 1/4 inch port and an M16x1.5 rod thread.

This extruded aluminium profile barrel is shorter than an ISO 15552 cylinder of the same bore. The twin rods prevent rotation and support twin tooling. Lacking the -S magnet option, this SKU cannot accept magnetic switches. Note that air cushions only decelerate; use an external rod lock for load holding.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225 Technical Specifications

ModelAirtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225
SeriesSAU profile-type cylinder
Bore sizeØ50 mm
Stroke225 mm
Acting typeDouble acting
Port size1/4"
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa825 N825 N
0.7 MPa1155 N—
Max (@1.0 MPa)168 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225

SAUProfile-type standard cylinder series.
50Bore size in mm.
×225Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225 Is Used

precision_manufacturing

Excavator Valve Banks

Synchronizes dual pilot valves in heavy equipment using equal push and pull force without rotational twist.

construction

Crane Load Centers

Drives twin tooling attachments symmetrically from both rod ends for balanced material handling.

engineering

Track Tensioning

Applies steady bidirectional thrust on undercarriage assemblies, fitting compact machinery envelopes.

Is the Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225 the Right Cylinder?

Size both ways: the 40 mm bore yields 528 N, while the 63 mm bore yields 1402 N each way at 0.5 MPa. This 50 mm bore at 825 N is ideal when you need anti-rotation guidance or twin tooling. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. For this 225 mm stroke, external guide rails are recommended to prevent side-load binding. Without a -S suffix, this SKU cannot host CMSG or DMSG sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225 FAQ

The B04- prefix denotes the construction-machinery dedicated variant of the SAUD50X225, with identical specs. Force is equal both ways: 825 N at 0.5 MPa, 1154 N at 0.7 MPa, and 1484 N at 0.9 MPa. It features a 1/4 inch port and M16x1.5 rod thread.

No. The air cushions only decelerate near stroke end; you need an external rod lock or pilot-operated check valve to hold a load. Additionally, this SKU lacks the -S magnet and cannot accept CMSG, DMSG, or EMSG sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac B04-SAUD Construction Machinery Dedicated Standard Cylinder B04-SAUD50X225

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for B04-SAUD50X225 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.