verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement B04-SAUD40X25, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.

AirTAC SU Series · Discontinued Profile Cylinder

Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25

The AirTAC B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25 is a double-acting profile-type standard cylinder with a Ø40mm bore and 25mm stroke, 1/4" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the B04-SAUD40X25, which matches its bore, stroke, force and mounting.

  • BoreØ40 mm
  • Stroke25 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • StatusDiscontinued → B04-SAUD40X25
$66.03 $73.53Save 10% Ships as B04-SAUD40X25 (current AirTAC replacement)
Ships as B04-SAUD40X25, the current AirTAC direct replacement (same bore, stroke, force, port and mounting). Order this code as usual. Your cart, checkout and order confirmation will show the B04-SAUD40X25 we ship. View B04-SAUD40X25
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
verified Genuine AirTAC sync_alt Direct SAU upgrade bolt Reply in 7-8 h

About the Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25

The AirTAC B04-SUD40X25 is a double-acting, double-rod profile cylinder where the B04- prefix marks it as the construction-machinery dedicated variant of the base SUD40X25, mechanically identical in every spec. Because a rod exits both ends on one piston, push and pull forces are perfectly equal both ways (528 N at 0.5 MPa). The extruded aluminium profile barrel is notably shorter than an ISO 15552 cylinder of the same bore. This discontinued model is fully replaced by the direct replacement SAUD40X25, sharing the exact 40 mm bore, 25 mm stroke, 1/4" port, and FA/LB mounting.

The double-rod architecture provides inherent anti-rotation and allows the back rod to drive a second tool simultaneously. Note that this non-magnetic SKU (no -S) cannot take a sensor; furthermore, the adjustable 21 mm air cushions only decelerate the piston near stroke end and do not hold loads on air loss—always use an external rod lock for vertical holding.

Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25 Technical Specifications

ModelAirtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25
SeriesSU profile-type cylinder (discontinued)
ReplacementB04-SAUD40X25
Bore sizeØ40 mm
Stroke25 mm
Acting typeDouble acting
Port size1/4"
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 21 mm
Max standard strokeUp to 1200 mm

Specifications follow the official AirTAC SU datasheet (now discontinued). The B04-SAUD40X25 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

The B04-SAUD40X25 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25

SUProfile-type standard cylinder (discontinued).
40Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.

Where the Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25 Is Used

precision_manufacturing

Excavator Linkage Actuation

Drives secondary construction-machinery mechanisms where equal push/pull force and anti-rotation are critical for precise positioning of heavy-equipment panels.

construction

Loader Boom Synchronization

Uses the twin-rod design to synchronize opposing loads on heavy-equipment builds, ensuring the 25 mm stroke moves rigidly without twisting.

engineering

Crane Fixture Clamping

Employs the back rod to drive a secondary clamp on construction-machinery fixtures, doubling work output from a single compact 40 mm bore body.

Replacing the Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25 with the B04-SAUD40X25

To replace the discontinued B04-SUD40X25, order the direct replacement SAUD40X25, which preserves the 40 mm bore, 25 mm stroke, 1/4" port, M12x1.25 rod thread, and FA/LB mounting. When sizing both ways, verify your load fits within the equal push/pull force of 528 N at 0.5 MPa; if you need more force, step up to the 50 mm bore neighbour, or drop to the 32 mm bore if less is required. Choose a double-rod cylinder when you need strict anti-rotation or must drive two tools from one piston. Because this specific SKU lacks a magnet (no -S), it cannot accept legacy CS1-B/DS1-B sensors, but the SAUD replacement fully supports current CMSG/DMSG/EMSG switches. For strokes at or above 300 mm, carefully manage side-load alignment to prevent guide wear.

Replacement checklist

  • ✓ Same bore / stroke → B04-SAUD40X25
  • ✓ Port/thread type (PT/G/NPT)
  • ✓ Magnet (-S): sensor family CS1-B → CMSG
  • ✓ Mounting reused (FA/FB/CA/CB/LB)
  • ✓ Need a built-in valve? → SAUF
Ask an Engineer

Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD40X25 FAQ

Yes, the B04-SUD40X25 (the construction-machinery dedicated variant of SUD40X25) is discontinued. The direct replacement is the SAUD40X25, which matches the 40 mm bore, 25 mm stroke, 1/4" port, and FA/LB mounting. The SAUD also upgrades to current CMSG/DMSG/EMSG sensors and offers the SAUF built-in-valve variant.

Because it is a double-rod cylinder, force is equal both ways: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and 950 N at 0.9 MPa. The bore dictates a fixed 1/4" port (default PT thread), the rod is 16 mm with an M12x1.25 thread, and speed ranges from 30-800 mm/s.

Related AirTAC SAU Cylinders

Request a Quote for the B04-SAUD40X25

Send us the quantity and destination. We confirm price, stock and lead time on the B04-SAUD40X25 replacement — usually within 7-8 hours.

Thank you. We received your request for B04-SUD40X25 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.