Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100
The AirTAC B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100
The B06-SAUD32X100 is an AirTAC double-acting, double-rod profile cylinder. The B06- prefix marks this as the battery-manufacturing dedicated variant of the SAUD32X100, sharing identical mechanics. A rod exits both ends on one piston, delivering an equal 345 N force each way at 0.5 MPa. The extruded aluminium profile barrel is shorter than a same-bore ISO 15552 unit.
This 32 mm bore unit uses a 1/8 inch port and M10x1.25 rod thread. Because both faces use the rod-side area, push and pull forces match exactly. This SKU lacks a magnet and cannot take a sensor. The Viton H seal option raises operating temperature to 150 C.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100 Technical Specifications
| Model | Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100 Is Used
Cell Stacking
Drives synchronized platens to align and stack prismatic battery cells without rotational drift.
Tab Welding
Clamps cell tabs with identical force on both extend and retract strokes for consistent ultrasonic welds.
Module Handling
Transfers battery modules between conveyor belts using twin tooling mounted on both rod ends.
Is the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100 the Right Cylinder?
Select this 32 mm bore when you need equal push and pull thrust for anti-rotation or twin-tool tasks. It yields 345 N each way at 0.5 MPa. Sizing up to the 40 mm bore gives 528 N, while dropping to a smaller bore is not available in this series. Mounting is limited to Basic, FA flange, and LB foot, matching the AirTAC SC series. Since this 100 mm stroke is under 300 mm, side-load guide concerns are minimal. Note that this no-magnet SKU cannot host CMSG or DMSG switches; choose a -S model for back-rod sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100 FAQ
The B06- prefix designates this as the battery-manufacturing dedicated variant of the SAUD32X100, with no mechanical changes. Force is equal both ways: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. It uses a 1/8 inch port.
No. A plain SAUD drifts without live air; the end cushions only decelerate, so use an external rod lock or pilot-operated check valve for holding. Also, this SKU lacks a magnet and cannot mount CMSG or DMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.