Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75
The AirTAC B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75 is a genuine double-acting profile-type standard air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75
The B06-SAUD32X75 is an AirTAC double-acting, double-rod profile cylinder. The B06- prefix marks this as the battery-manufacturing dedicated variant of the SAUD32X75, sharing identical mechanics. Because a rod exits both ends, the output force is equal both ways at 345 N each way at 0.5 MPa. It uses an extruded aluminum barrel, making it shorter than an ISO 15552 cylinder of the same bore.
This 32 mm bore unit features a 1/8" port and a 12 mm rod. Without the -S suffix, this SKU cannot take a magnetic switch. A plain cylinder does not hold load without live air; the cushions only decelerate.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75 Technical Specifications
| Model | Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75
| SAU | Profile-type standard cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75 Is Used
Cell Stacking
Applies equal push and pull force for precise, non-rotating alignment during prismatic cell stacking.
Tab Welding
Drives twin welding heads simultaneously from one piston for synchronized battery tab joining.
Module Handling
Transfers battery modules on the line using the compact profile to save machine space.
Is the Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75 the Right Cylinder?
When sizing this double-rod unit, the equal both-ways force is 345 N at 0.5 MPa. If you need less force, step down to the 32 mm bore (345 N), or step up to the 40 mm bore (528 N) for more power. Choose this twin-rod layout when you need anti-rotation guidance, synchronized twin tooling, or a back rod to trip a switch. It supports SC-series FA flange and LB foot mounts. For any stroke at or above 300 mm, use an external guide to prevent side-load wear. Note this no-S SKU cannot accept sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75 FAQ
The force is equal both ways because rods exit both ends. At 32 mm bore it provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa. It uses a 1/8" port.
B06- marks the battery-manufacturing dedicated variant of the SAUD32X75, mechanically identical to the base model. It does not hold load without live air; use an external rod lock for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAUD Battery Dedicated Standard Cylinder B06-SAUD32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.