Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000 is a genuine double-acting standard air cylinder with a Ø40mm bore and 1000mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke1000 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000
The B06-SC40X1000 is an AirTAC double-acting pneumatic cylinder engineered for battery-manufacturing environments. The B06- prefix designates this as a battery-dedicated variant of the standard SC40X1000, meaning it is mechanically identical to the base model but tailored for cell, module, and pack assembly lines. It delivers 628 N of push force at 0.5 MPa and features a 16 mm piston rod.
With a 1000 mm stroke, this unit reaches the maximum standard stroke limit for a 40 mm bore. It utilizes adjustable cushions with a 21 mm length to decelerate the piston at stroke ends, while the body length A measures 142 mm. The standard TPU seals provide reliable operation from -20 to +70 C.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000 Is Used
Battery Cell Stacking
Drives the extended horizontal or vertical movement required for aligning and stacking battery cells in automated production lines.
Module Handling
Transfers battery modules across long-stroke distances between assembly stations on the factory floor.
Tab Welding Positioning
Extends to position battery packs accurately for automated tab welding equipment over a 1000 mm reach.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000 the Right Cylinder?
This 40 mm bore provides 628 N push force at 0.5 MPa. If your battery handling system requires less force, stepping down to a 32 mm bore yields 402 N. For heavier pack manipulation, a 50 mm bore increases output to 982 N. When replacing this cylinder, match the 40 mm bore, 1000 mm stroke, PT1/4 port thread, basic mounting, and non-magnet configuration exactly.
Because this model features a 1000 mm stroke, the 16 mm rod is highly susceptible to bending under side loads. For battery stacking or tabbing operations that generate lateral forces, use an external guide rail or a guided cylinder to prevent rod bearing damage and premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC40X1000, offering the same 628 N push force at 0.5 MPa, PT1/4 port, and 1000 mm stroke, but is designated for battery industry applications.
No, this is a double-acting air cylinder and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston at the end of the stroke. To hold a load vertically or resist drift, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.