Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S is a genuine double-acting standard air cylinder with a Ø40mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S
The AirTAC B06-SC40X100S is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC40X100S, meaning it is mechanically identical to the base model. It features a 40mm bore and a 100mm stroke, delivering a robust 879N of push force at 0.7 MPa.
Equipped with a built-in magnet (indicated by the S suffix), this unit allows CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise position detection. It utilizes a 16mm piston rod, a PT1/4 port, and adjustable cushions measuring 21mm to smoothly decelerate the piston at stroke ends. The standard TPU seals provide reliable operation across a -20 to +70 C temperature range.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S Is Used
Cell Stacking Presses
Provides consistent 879N push force at 0.7 MPa for aligning and pressing lithium-ion battery cells during module stacking processes.
Tab Welding Feed
Utilizes the built-in magnet for exact position confirmation, driving electrode feeding mechanisms for battery tab welding.
Module Handling
Actuates 100mm stroke gating and diverting mechanisms on conveyor lines to route battery modules through pack assembly stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S the Right Cylinder?
This 40mm bore generates 628N push force at 0.5 MPa; if your battery stacking or handling application requires less force, consider stepping down to the 32mm bore (402N at 0.5 MPa), or step up to the 50mm bore (982N at 0.5 MPa) for heavier pack manipulation. At a 100mm stroke, side-load risks are moderate, but always ensure proper rod alignment to prevent premature bearing wear.
When replacing this cylinder on your assembly line, match these five critical points: 40mm bore, 100mm stroke, PT1/4 port thread, basic mounting style, and the built-in magnet (-S). The SC is a tie-rod cylinder and is shorter than ISO 15552 models, so direct dimensional interchangeability with ISO profiles is not possible.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC40X100S cylinder. It is mechanically identical to the base SC40X100S, featuring the same 40mm bore, 100mm stroke, 16mm rod, and built-in magnet, but is designated for battery cell, module, and pack assembly lines.
No, the adjustable cushion only decelerates the piston near the end of the stroke to soften impact. It does not lock or hold the load. If your battery handling application must hold a position without live air pressure, you must use an external mechanical lock, a rod brake, or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.