Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150 is a genuine double-acting standard air cylinder with a Ø40mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke150 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150
The B06-SC40X150 is AirTAC's battery-manufacturing dedicated variant of the standard SC40X150 single-rod, double-acting tie-rod cylinder. The B06- prefix designates its use in battery cell, module, and pack assembly lines, but mechanically it shares the exact same physical specifications as the base SC40X150 model.
Operating with a 40mm bore and 150mm stroke, this cylinder delivers 879N of push force at 0.7 MPa and 628N at 0.5 MPa. It features a 16mm piston rod, a PT1/4 port, and 21mm adjustable cushions to absorb impact at stroke ends. With a body length A of 142mm, the total extended length is 292mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150 Is Used
Cell Stacking Press
Applies consistent 879N pressure at 0.7 MPa for aligning and stacking battery cells during module assembly.
Pack Handling
Drives 150mm stroke movements to index battery packs along the production conveyor line.
Tab Welding Clamp
Secures battery tabs in place for automated laser welding with adjustable end cushions to protect delicate components.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150 the Right Cylinder?
This 40mm bore provides a solid mid-range force output for battery stacking and handling. If your assembly line requires less force, stepping down to a 32mm bore yields 563N at 0.7 MPa, while moving up to a 50mm bore provides 1374N at 0.7 MPa for heavier pack manipulation. For replacements, match the 40mm bore, 150mm stroke, PT1/4 port thread, basic mounting, and non-magnet configuration exactly.
At a 150mm stroke, the 16mm rod maintains good rigidity, but always verify that your battery handling fixture does not induce excessive side loads. For high-offset tabbing or welding presses, use an external guide rail to prevent rod bearing wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC40X150, offering the same 40mm bore, 150mm stroke, and 879N push force at 0.7 MPa, simply designated for battery industry applications.
No, the SC series is double-acting and cannot hold position without live air pressure. The adjustable cushions only decelerate the piston near the stroke ends; a mechanical lock or external brake is required to hold a battery module in place during an emergency stop.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.