Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S is a genuine double-acting standard air cylinder with a Ø40mm bore and 150mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke150 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S
The B06-SC40X150S is a battery-manufacturing dedicated variant of the standard AirTAC SC40X150S, mechanically identical to the base model but designated for cell, module, and pack assembly lines. This double-acting tie-rod cylinder provides 628 N of push force at 0.5 MPa and 1130 N at 0.9 MPa, making it well-suited for medium-duty handling and stacking tasks.
It features a 16 mm piston rod, a PT1/4 port, and 21 mm adjustable cushions to soften end-of-stroke impact. The "S" suffix indicates a built-in magnet for CMSG/DMSG/EMSG sensor tracking along the 142 mm body length. Total extended length is approximately 292 mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S Is Used
Cell Stacking
Applies consistent 879 N force at 0.7 MPa to align and press battery cells during module stacking operations.
Module Handling
Moves battery modules along the assembly line, using the magnetic piston for precise position confirmation.
Tab Welding Press
Provides stable clamping force for battery tab welding with adjustable cushions to protect delicate components.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S the Right Cylinder?
This 40 mm bore offers 628 N push at 0.5 MPa; step down to a 32 mm bore (402 N) for lighter tabbing tasks, or up to a 50 mm bore (982 N) for heavier pack lifting. For direct replacement, match the 40 mm bore, 150 mm stroke, PT1/4 thread, basic mounting, and the magnetic piston.
At 150 mm stroke the side-load risk is moderate, but always ensure the load is guided externally to prevent rod bearing wear. An SC cylinder does not hold position without live air pressure; use a pilot-operated check valve if the battery cell must remain suspended during air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S FAQ
The B06- prefix designates this as an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC40X150S, offering the same 628 N push force at 0.5 MPa, PT1/4 port, and TPU seals, simply marked for battery industry application tracking.
No, the SC series is double-acting and will drift or drop if air pressure is lost or the valve is centered. The adjustable cushion only decelerates the piston near stroke end. A mechanical lock or external pilot-operated check valve is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.