Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175 is a genuine double-acting standard air cylinder with a Ø40mm bore and 175mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke175 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175
The B06-SC40X175 is a double-acting tie-rod pneumatic cylinder where the B06- prefix designates it as AirTAC's battery-manufacturing dedicated variant, mechanically identical to the standard SC40X175. It generates 628N of push force at 0.5 MPa, making it well-suited for medium-duty positioning in cell assembly and module handling. This 175mm stroke operates with a 16mm piston rod and PT1/4 ports.
Featuring adjustable cushions of 21mm to decelerate the piston near the end caps, this unit minimizes impact during rapid cycling. The body length A is 142mm, yielding a total extended length of 317mm. It is a genuine AirTAC component built for reliable, high-speed automation.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175 Is Used
Cell Stacking Press
Applies consistent 879N push force at 0.7 MPa for aligning and pressing prismatic battery cells during module stacking operations.
Module Handling
Drives linear pushers to index battery modules along assembly conveyors, utilizing the 175mm stroke for precise transfer distances.
Tab Welding Clamp
Actuates clamping fixtures to hold battery tabs firmly in place during laser welding, ensuring exact alignment.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175 the Right Cylinder?
This 40mm bore provides 628N push and 528N pull at 0.5 MPa. If your battery stacking or handling process requires less force, the 32mm bore offers 402N; for heavier pack manipulation, stepping up to the 50mm bore yields 982N push force at 0.5 MPa. Because this model lacks the -S suffix, it has no internal magnet for position sensing.
When replacing this cylinder, match all five points: 40mm bore, 175mm stroke, PT1/4 port thread, basic mounting (no bracket), and non-magnetic configuration. For this 175mm stroke, ensure the load is guided externally, as long unsupported rods are susceptible to bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SC40X175, offering the same 40mm bore, 175mm stroke, and 879N push force at 0.7 MPa, but is designated for battery production lines.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The 21mm adjustable cushion only decelerates the piston at stroke end. For vertical battery handling, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.