Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200 is a genuine double-acting standard air cylinder with a Ø40mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke200 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200
The B06-SC40X200 is an AirTAC double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC40X200, meaning it is mechanically identical to the base model with a 40mm bore and 200mm stroke. It delivers 628N of push force at 0.5 MPa and features a 16mm piston rod with PT1/4 ports.
Providing 879N of thrust at 0.7 MPa, this cylinder is well-suited for medium-duty positioning tasks on cell assembly lines. It includes adjustable cushions measuring 21mm to decelerate the piston at stroke ends, and its standard body length A is 142mm. The standard TPU seals support an operating temperature range of -20 to +70 C.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200 Is Used
Cell Stacking Press
Applies consistent 879N pressure at 0.7 MPa for aligning and stacking battery cell layers during module assembly.
Module Handling
Extends 200mm to push battery modules onto conveyor belts or transfer stations between production zones.
Tab Welding Clamp
Holds battery tabs firmly in position for automated laser welding with its 16mm rod and adjustable end cushions.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200 the Right Cylinder?
This 40mm bore offers 628N push force at 0.5 MPa; if your battery stacking or handling fixture requires less force, stepping down to a 32mm bore yields 402N, while a 50mm bore provides 982N for heavier pack manipulation. Ensure your application does not rely on this cylinder to hold a load when air pressure is lost, as pneumatic cylinders drift without live pressure and require an external mechanical lock or pilot-operated check valve for position holding.
For a 200mm stroke, side-load management is necessary to prevent rod-bearing wear. Use an external guide rail to support the load, especially in battery tabbing or cell handling setups. When sourcing a replacement, match these five points exactly: 40mm bore, 200mm stroke, PT1/4 port thread, basic mounting, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated line cylinder. It is mechanically identical to the standard AirTAC SC40X200, offering the same 40mm bore, 200mm stroke, and 879N thrust at 0.7 MPa, with no changes to physical specifications.
At an operating pressure of 0.5 MPa, it provides 628N of push force and 528N of pull force. At 0.7 MPa, the push force increases to 879N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.