Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S is a genuine double-acting standard air cylinder with a Ø40mm bore and 200mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke200 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S
The B06-SC40X200S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the SC40X200S, meaning it is mechanically identical to the standard model but highlighted for cell, module, and pack assembly tasks. It features a 40mm bore and a 200mm stroke.
Delivering 628N of push force at 0.5 MPa (879N at 0.7 MPa), this unit is equipped with a built-in magnet for position sensing. It uses a 16mm piston rod, PT1/4 ports, and has a body length A of 142mm, yielding a total extended length of 342mm. Adjustable cushions at both ends ensure smooth deceleration of moving loads.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S Is Used
Cell Stacking Press
Provides consistent 879N push force at 0.7 MPa for aligning and pressing lithium-ion battery cells during automated stacking processes.
Module Handling
Extends 200mm to push battery modules onto conveyor lines or index them into testing stations with smooth end-of-stroke cushioning.
Tab Welding Clamp
Uses the built-in magnet to trigger reed sensors, confirming clamp position before the welding head descends on battery tabs.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S the Right Cylinder?
This 40mm bore provides a solid middle ground, stepping up from the 32mm bore (402N push at 0.5 MPa) when more actuation force is needed, or stepping down from the 50mm bore (982N push at 0.5 MPa) to save space. The 200mm stroke requires attention to side loads; long unsupported rods are prone to bending, so use an external guide rail or a guided cylinder to prevent premature rod-bearing wear.
When ordering a replacement, match these five points exactly: 40mm bore, 200mm stroke, PT1/4 port thread, basic mounting (no bracket), and the built-in magnet (-S suffix). The SC is a tie-rod design and is shorter than ISO 15552 cylinders, so it is not a direct dimensional replacement for ISO profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S FAQ
The B06- prefix indicates this is an AirTAC cylinder dedicated to battery manufacturing applications. Mechanically, it is identical to the standard SC40X200S, offering the same 40mm bore, 200mm stroke, 16mm rod, and 628N push force at 0.5 MPa.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushions only decelerate the piston near the stroke ends; a mechanical lock or external pilot-operated check valve is required to hold vertical loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.