Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225 is a genuine double-acting standard air cylinder with a Ø40mm bore and 225mm stroke, PT1/4 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ40 mm
- Stroke225 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225
The B06-SC40X225 is an AirTAC double-acting tie-rod pneumatic cylinder. The B06- prefix designates this as a battery-manufacturing dedicated variant, mechanically identical to the standard SC40X225. It delivers 628N of push force at 0.5 MPa and features a 16mm piston rod with adjustable cushions.
With a 225mm stroke, this unit is a non-standard made-to-order length exceeding the standard 200mm increment but staying well within the 1200mm maximum for this bore. The body length A is 142mm, yielding a total extended length of approximately 367mm. It operates on filtered air at 0.15-1.0 MPa using standard TPU seals.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø40 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (approx.) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225
| SC | Standard tie-rod cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225 Is Used
Cell Stacking
Provides the precise 628N push force at 0.5 MPa needed for aligning and stacking prismatic battery cells in module assembly.
Tab Handling
Drives linear movements for feeding, positioning, or sorting battery tabs during the automated welding process.
Pack Indexing
Indexes battery packs along an assembly conveyor, utilizing its 225mm stroke to push heavy trays between stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225 the Right Cylinder?
This 40mm bore provides 628N push at 0.5 MPa. If your battery stacking or handling line needs less force, step down to the 32mm bore (402N push at 0.5 MPa). For heavier pack manipulation, step up to the 50mm bore (982N push at 0.5 MPa).
Because the 225mm stroke is over 200mm, watch for side-load bending on the 16mm rod. Use an external guide rail or a guided cylinder to prevent rod-bearing wear. For a direct replacement, match the 40mm bore, 225mm stroke, PT port thread, basic mounting, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC40X225, offering the same 40mm bore, 225mm stroke, and 879N push force at 0.7 MPa, with no changes to physical specs or materials.
At the maximum operating pressure of 0.9 MPa, this 40mm bore cylinder generates a push thrust of 1130N and a pull thrust of 9425N. The theoretical maximum force at 1.0 MPa is 128 kgf.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC40X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.